Posted on February 17, 2014 at 23:39 Hello, can you help me with touching controller and STM32F4 Discovery kit? I use controller XPT2046 with SPI and I want use SPI2. I know, that SPI 2 is on pins PC2, PC3 and PB Is it true? I init this pins i...
Posted on February 17, 2014 at 21:511- When using MATLAB-Target to configure stm32f4 discover board , some problems arise While building the stm32d demos. for example while building the code for ''ButtonAndLeds'' demo, the following error occurs :''...
Posted on February 16, 2014 at 18:57Hello I just finished a little project. Now we can read and play Amiga music modules with stm32f429 See the video here :http://youtu.be/xwjkF8HkwPM I will made a new page on my https://sites.google.com/site/supr...
Posted on December 09, 2013 at 15:50Hi,I have an interest in running Linux (uClinux) on the Cortex M4, namely one of the MCU�s in the STM32F4 series. These MCU�s have I-code/D-code caches for flash access as part of the ART accelerator, but clearly ...
Posted on February 13, 2014 at 22:59Hi forum!Here is a very strange problem I'm facing with the SPI1 peripheral of the STM32F417 connected to the LIS3DH. I have to single-step through my code with my debugger in order to get the right data from the ...
Posted on March 15, 2013 at 08:39Hi! The Discovery board based on f407 served me as a starting point in preparing a course on the use of microprocessors for local students, which do not have much experience with hardware, but are familiar with the p...
Posted on February 12, 2014 at 15:07I have been reading conflicting reports on writing/reading to/from FLASH when running your program code from FLASH as well.First of all, where is there documentation saying that you can stall the processor by doin...
Posted on February 08, 2014 at 05:25 Could somebody help me to determine why my board is running at third of the speed. I am using emBlocks IDE and STM32F429I-Discovery_FW_V1.0.1 library. The loader code calls SystemInit (row 337 in system_stm32...
Posted on February 05, 2014 at 16:18 Hello everyone, I have looked for the answer on the internet but I have found no answer so far. Would you know if it is possible to command a transceiver MAX2830 with the STM32f429 ? http://datasheets.ma...
Posted on February 06, 2014 at 07:46I wrote a code to generate rising edge interrupts for a 4MHz clock input to the board. The 4MHz input is generated by MCO while the core is pushed to 168MHz. I found that certain interrupts are not being tacked at...
