Hi,I am using STM32G491RE. I have to read temperature values from ADC. We used voltage divider circuit to map the voltage values with temperature values it is non linear change between volatge and temperature.I tried below wayconst uint16_t adc_valu...
Hi there,We use a STM32F723 controller and want to connect two external RAM devices.Now we have to select a RAM that fits to the FMC. What we can't find in the reference manual RM0431 is if SDRAM-DDR functionality is provided or only SDRAM without DD...
Hello, I have the following device under test (DUT), based on the CDC Standalone example in STM32Cube_FW_F4_V1.27.0. STM32F469I MCUUSB3300 ULPI PHYHCLK and SYSCLK set to 180MHzTXFIFO size is set to 2048 bytes, RXFIFO size is set to 1024 bytesThe DUT ...
I already wrote a about this to pinned release thread, but as there is no public tracker I don't know if that was the correct place, so I decided to a make a new thread.On macOS, it is not possible to type '@', because ALT+L is hard coded for 'Login'...
Hello team, i have a Nucleo H745ZI_Q board in this am working Differential ADC and Ethernet (using FreeRTOS ) in cortex M7 . ADC is working fine in indivisual code And Ethernet also working fine in indivisual code when going to integrate both i...
Hello,I'm searching for a way to use sector 0 as storage memory but no luck so far.I'm using STM32F401CCU6 and I'm working on a firmware which have to save about 300 bytes in a no volatile memory. For this microcontroller family we have this memory m...
Hi,I am looking for some guidance on my project. It would be great if someone could help me out.I am trying to perform OTA on STM32F103C8T6 using ESP. The ESP and STM communicate over UART. Here the binary is downloaded by the ESP from a server and, ...
Hallo,is it possible on any STM32U5 device to write only a SPI or other serial stream, that sends data on rising and falling edge?best regards
STM32CubeIDE 1.13.2 was released on st.com as well as an in-tool update patch aligned with STM32CubeMX v6.9.2 that is available for download. Main issues fixed in this patch: Ticket 160463 - [STM32CubeIDE 1.13.0]Build error after calling printf.Ticke...
I would like to use the mbedTLS version 2.28.2.v2 on the secure boot for stm32h743ii controller. I have downloaded SBSFU v2.6.2 and Built the secure boot binary on top of the example project from H753 2_images_OSC folder. Secure boot is running the t...
Here are some useful resources to help you find your way around the community and feel comfortable using this website.