My board does not have the default firmware anymore and I do not have a backup of it either. I have the source code and the HAL driver and have tried for hours to get the code to compile. I get many errors for various HAL header files and the sourc
I am going to build linux system on a board based on STM32MP257F and have read many kinds of related technical documents.In the process, a question bothers me. I want to modify only several components such as uboot and kernel in existing STM32MPU Dis
I was attempting to follow the STM32H563ZI video but I cannot get the current repository for the STM32H5.See Problem1.jpgI want it to upload it but ti comes back with a failureSee Problem2.jpgWhat steps do I need to take to fix this?
Dear all,I'm implementing Over-the-air firmware updates for a board using the STM32N657 MCU.In the Appli, I download the new firmware binary over Wifi and store it to RAM at a fixed location in AXISRAM5 and 6. In order to flash the new binary to the
in “usbd_msc_scsi.c” at function “SCSI_ModeSense6”/* Check If media is write-protected */ if (((USBD_StorageTypeDef *)pdev->pUserData[pdev->classId])->IsWriteProtected(lun) != 0) { MSC_Mode_Sense6_data[2] |= (0x1U << 7); /* Set th
I am enquiring about comparators in STM32G474.For COMP4, it says that the INP can be connected to PB0 and INM can be connected to DAC1_CH1. But when PB0=1.65V and PA4(which is the output of DAC1_CH1)=3.15V , the VALUE bit in COMP_CSR is 1, which shou
Hi, I’m running the ST BLE Sensor app on an iPhone and when I attempt to change the profile from beginner to expert, it does not take. The result is that many options are grayed out. Am I doing something wrong? Is there a work-around? I don’t have ac
Hi everyone,I'm using UART Receive-to-IDLE with circular linked-list GPDMA on an STM32H7RS and ran into a problem where reception stopped with HAL_DMA_ERROR_DTE.The DMA node and RX buffer are both in DMA-accessible, non-cacheable RAM and aligned to 3
Dear all,I am facing some compiling issue on STM32CUBEIDE 2.2.0 with STM32G071KBI was trying to use st25r3916B NFC library and i have added ST/RFAL/Include & sources and relevant middleware into path & symbol of project.However during build,.
I believe I’ve encountered an Issue with the current version of the STM32 HAL2 and wanted to raise an issue, but I’m not sure where best to raise the issue.The one of the new features in the new HAL2 hash is that HAL_HASH_Update can handle input size
Environment - Device: STM32H562ZI- Reference manual: RM0481 Rev 5- HAL: STM32Cube H5 HAL Driver V1.5.0- Peripherals: GPDMA used for SPI slave Tx/Rx. SPI in slave mode, normal (non-circular) transfers, no linked-list. Summary On our SPI slave DMA path
Hello ST Community,I am encountering a bizarre, highly intermittent race condition on an STM32H743 board that has completely baffled our hardware and firmware team. I wanted to share this here in case anyone has cracked a similar low-level synchroniz
Here are some useful resources to help you find your way around the community and feel comfortable using this website.
It's time to look back at the most engaged areas in the ST Community.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.
