I'm working on my project with L432KC which can support only I2C. I need MCU board which is supporting I3C communication.
I am using EVB NUCLEO-H503RB with I3C Target feature. I have successfully assign a dynamic address (0x50) to this I3C Target: However, I could not get ACK from this Target with Address 0x50: Below are my configure, is there anything missing for res...
I have a EVB NUCLEO-H503RB and tried to implement I3C Target feature. Before testing on I3C system, I would like to test some basic read write with legacy I2C Controller. However, I just found that it seems to be not support with static address on I3...
Hi all. I tried to communicate(private) with my I3C slave device using STM32H503RB board. To communicate with my device, I need to specify register address to write/read data. i.e. Frame = (Start with Slave ID w/ W=0) + (register address w/ W=0) + ...
Any chance STM32 MCUs will adopt native i3c support any time soon? Many new devices, including some from ST (like the LPS22HH), support it. It's a compelling (new-ish) standard.