We are pleased to announce that the minor version 6.14.1 of STM32CubeMX is available. What is new in 6.14.1: SAI settings not displayed in the configuration tab of STM32H7Bxxx devices: After upgrading to STM32CubeMX 6.14.0, the SAI tab configuration ...
We are pleased to announce that the release 6.14.0 of STM32CubeMX is available. What is new in 6.14.0: Added the support for the STM32WBA6xxx microcontrollers and:Added the support for USBX multi-instanceAdded the support for the memory management to...
As titleI generate USB CDC with STM32CubeMX,and try to send data by using interrupt transfer end point 0x81I try to usb Bushound to receive data, but it could not revive any data from CDC interrupt IN.Is there any things that i should be modify?Exper...
Dear ST Hello,I am using Cubmx to create an RTOS for stm32f429I discovery board.I generated the default project for this board with FreeRTOS.I have an error compilation,Middlewares/Third_Party/FreeRTOS/Source/tasks.o: In function `prvAddNewTaskToRead...
I enabled SPI1 on CubeMX using STM32L433 on pins 11(SPI-CLK), 16(MISO), 17(MOSI). I am interfacing it to a Kionix MEMS sensor on SPI. I detect no signals on the pins. Do I need to separately write configuration for GPIO for the SPI pins?I could not f...
STM32CubeMX v6.1.0, H7 lib v 1.8.0is generating code where main() calls MX_USB_DEVICE_Init();, but MX_USB_DEVICE_Init does not seem to be defined anywhere.int main(void) { ... /* Initialize all configured peripherals */ MX_GPIO_Init(); ... MX...
Hello @Khouloud ZEMMELI ,STM32CubeMX 6.0.1 not allowing same text for Task Name and Entry Function.As per my understanding the text entered against property Task Name will be encapsulated in double quotes and will be assigned to variable name. The t...
Hello,I had both the ProjectManager.TemplateDestinationPath and ProjectManager.TemplateSourcePath pointing to folder which did not exist.So, I updated `ProjectManager.TemplateSourcePath` to`ProjectManager.TemplateSourcePath=C\:\\STM32CubeMX\\db\\extr...
Hi,I have generated and built code by STM32CubeIDE but the SysTick and Timer not work. I set breakpoint but the interrupt function just not run. GPIO feature work normal. But when I create the project by STM32CubeMX with the same configuration and bu...
Hi,I noticed that if I enable an alarm for the RTC using CubeMX 6.1.0 with date/weekday mask enabled, it results in this line being generated:RTC_AlarmStruct.AlarmMask = RTC_ALARMMASK_DATEWEEKDAYHowever, that flag is undefined. In my case, it should ...
After reading the Oscillator Design Guide, I picked a LSE crystal for my F7 from the list provided in that guide.But how do I know what the appropriate drive level is? My crystal has a max drive level of 1 uW. But does that corresponds to Low, Medi...
