Hi all,I'm using STM32Cube IDE (version 1.13.1, build 17479_20230728_0839 ) to manage my company project based on a STM32U5 MCU.More specifically, I'm using linked list feature (for playing audio with SAI + DMA transfer) and I have noticed what appea...
Versions:STM32CubeMX 6.12.0FreeRTOS X-Cube-FREERTOS 1.1.10 (FreeRTOS Kernel 10.5.1)STM32U5 MCU Package 1.6.0Although STM32CubeMX now has support for FreeRTOS, it does not appear to recognise the FreeRTOS support (https://www.freertos.org/Security/04-...
Hi,I'm trying to combine the SPI and GPDMA on STM32U5. In the various SPI transfer APIs with suffix '_DMA', I can see the code below: /* Enable the Tx DMA Stream/Channel */ if ((hspi->hdmatx->Mode & DMA_LINKEDLIST) == DMA_LINKEDLIST) { if (h...
HiI’m using CubeMX 6.12.0 with a STM32U5G7VJT6Q project.When using a fractional divider setting for PLL3 (in the RCC System Clock configuration), CubeMX generates the below LL library code.The LL_RCC_PLL3FRACN_Enable() is correctly included, but it s...
HiI have problems with the I2C frequency when I'm generating code with CubeMX 6.12.0 for the STM32U5A9. The timing register from the I2C3 is generated wrong, which leads to a frequency around 350kHz instead of selected 400kHz in FastMode operation.Th...
We are using MIPI-DSI on a STM32U5G9NJ.First bug: There are 2 pins missing in the Pinout View: D4 and J9. Both are VDD11 pins. Second bug:After Enabling LTDC and DSI in STM32CubeMX I can't select "Active High" for "Data Enable Polarity" in LTDC -> Pa...
I can not find any complete project for USBX or TinyUsb library to drive. Can anyone to help me please?i need USB CDC VCP AND AUDIO DEVICE simultaneously in custom board.
Hello all, I recently install CubeIDE and I want to do a blinky example on the User led for the nucleo-U545REI see that the GPIO for the USER LED is PA5 So in cubeIDE, I open CubeMX, configure PA5 PIN TO GPIO_OUTPUT and try to generate the code by cl...
New to STM32. Ordered myself a Nucleo-U545RE-Q Board for software generation used in an embedded project later. Generated a project and started working on it. First it worked just fine. But since mid of last week (start of August), most likely after ...
Once I enable UCPD for STM32U5G9 source mode, Cube MX (the latest version 6.12) generates code which does not compile. I am sometimes wondering what is CubeMX testing process - if it exists, ofc.
