STM32 MCUs Products

cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Exporting flash files from atollic

Posted on September 27, 2010 at 18:53Is it possible to export flash files from atollic TrueStudio using a separate tool rather than the stock ''flash converter - not included with the lite version'' ?

izua by Associate II
  • 1726 Views
  • 13 replies
  • 0 kudos

Fixed

Posted on October 26, 2010 at 11:24 Fixed

xacc by Associate II
  • 313 Views
  • 0 replies
  • 0 kudos

SPI2

Posted on October 22, 2010 at 05:42I'm trying to talk to an sdcard via SPI with the SPI2 peripheral. This is my initialisation routinevoid SPIInit(){ RCC_APB1PeriphClockCmd(RCC_APB1Periph_SPI2, ENABLE); SPI_InitTypeDef SPI_InitStructure; SPI_InitStr...

izua by Associate II
  • 477 Views
  • 1 replies
  • 0 kudos

Uart application

Posted on October 06, 2010 at 15:35hi i was tring to activate USART3 On Port C PC10,PC11.   i used this configuration : USART3->CR1 = 0x0C; //Receiver enable, Transmitter enable, USART disable     USART3->CR2 = 0x0;     USART3->BRR=156;//9600 at 24M...

ezrab by Associate II
  • 1940 Views
  • 15 replies
  • 0 kudos

using flash as eeprom

Posted on October 19, 2010 at 15:14hi. i found out that it is possiable to use the flash as eeprom but the example i found was very long and complicated is there asimple way to do that? thanks.

ezrab by Associate II
  • 1674 Views
  • 16 replies
  • 0 kudos

watch Dog question

Posted on October 20, 2010 at 11:29hi i saw that the slower watch dog i can make will reset after  /* On Value line devices, Enable WWDG and set counter value to 127, WWDG timeout = ~1366 ×–s * 64 = 87.42 ms */ can i make it slower like 500msec? th...

ezrab by Associate II
  • 539 Views
  • 4 replies
  • 0 kudos

Error while Programming (Atollic TrueSTUDIO lite)

Posted on October 18, 2010 at 20:21Hey There, after three days of succesfull playing with my stm32discovery i tried to attach a sd-card. After this i got an error while programming the new Firmware:C:/msys/1.0/build/tools/obj/gdb-7.1/gdb/regcache.c:...