Posted on August 06, 2011 at 20:47After WKUP I want configure PA0 for output, then at some point configure for WKUP and go into STANDBY deep sleep mode. It appears that once the EWUP bit is set in RCC_CSR a) the EWUP bit cannot be reset unless ther...
Posted on August 06, 2011 at 09:11&sharpifdef __cplusplusextern ''C'' {&sharpendifI've seen the above in all the library header files , but what does it mean? #mix-c-and-c++
Posted on July 15, 2011 at 19:58Hi,I have spent the better part of the day trying to get code that run perfectly on an STM32F107VC using a 25MHz crystal to run on an STM32F105VC with an 8 MHz crystal. We are using v3.5.0 of the library from ST.Chang...
Posted on August 04, 2011 at 12:41Hello there...My aim is, I need to be able to configure ports of stm32. Is there an utility/software in order to configure GPIO of it?Any help, feedback will be so helpful!..
Posted on August 06, 2011 at 01:08I am trying to get the EEPROM I2C demo for the STM3220G-EVAL kit to work. I am using the IAR toolset. It compiles without error, and loads onto the demo board and runs to the point of displaying ''Communication Er...
Posted on July 20, 2009 at 08:17How many USB VCOM ports can i make?
Posted on August 05, 2011 at 17:47I have been working with true studio for a while. I have mostly done small projects that do not require a large amount of include files. Currently however i have been working on a larger project (an MP3 player to be...
Posted on July 29, 2011 at 23:24I would like to know if the ST-LINK V2 allow to set a breakpoint while de code is running. I'm using EWARM 6.21.
Posted on August 03, 2011 at 15:06I'd like to add stack usage monitoring to my application. I can't afford the overhead of stack checking on every function call, so I was considering adding a routine that runs periodically to monitor the stack high-...
Posted on July 30, 2011 at 12:46Hi, I am using a STM32F100CB part on my target. I have not pulled RTCK, DBGRQ and DBGACK down with a 10K as recommended by the App note AN2586. Presently I am not able to get Ulink2 to communicate with my target. I ge...
