STM32U0 is the first Cortex-M0+ with a static consumption of only 160 nA in standby mode with RTC (Real-Time Clock) and 16 nA in shutdown. It also achieves 118 points in CoreMark and targets SESIP level 3 and PSA level 1 focusing on firmware code pro...
The new STM32H7R/S lines are built on the success of the STM32H7 series, offering even higher performance and security at a lower cost. The STM32H7R/S is a bootflash-based MCU powered by a Cortex®-M7 core running up to 600 MHz, with 64 KB of user fla...
Posted on November 25, 2010 at 15:38hi. i have aquestion. if i use the scan mode to measure sevrel channels at the end of the list of channel to measure how can i collect all the data from all the channels? or do i have collect the data after every ...
Posted on November 27, 2010 at 15:24Hello, In the latest ChibiOS/RT release 2.1.4 I added a specific demo application for the STM32VL-Discovery board. The demo application introduces to the use of the RTOS kernel and of the HAL, PAL, PWM, ADC, SPI a...
Posted on November 26, 2010 at 11:18Empty Peripherals Menu while debugging with Keil
Posted on November 25, 2010 at 05:56 USB mass storage device implementation on internal flash in STM32F103VC
Posted on September 26, 2010 at 20:13In Keil, if I go to Flash->Download, it says ''loaded ... DISCOVER.axf'', the red COM LED blinks couple of times, and then stays red. The whole thing seems to be hanging. When I power-cycle the device, the old fi...
Posted on November 24, 2010 at 22:22Can anybody help me how to with ''RUN'' menu,how to with launching. Is there more detail manual about AtollicStudio configuration. Thank you. #atollic
Posted on November 24, 2010 at 16:27STUSB03e Enumeration Process
Posted on November 24, 2010 at 13:23Disabling TIM2 CH1 Output
Posted on November 23, 2010 at 16:38A problem with a long interrupt latency in STM32L
Posted on November 23, 2010 at 16:23STM32L Current consumption in the full rum mode