Hi everyone!Possibly I'm not able to see the right parameter to modify and so I hope there is an easy answer to my question. I'm working with the STM32CubeIDE with a project to begin to test how ADC works for STM32G474RE. I'm working with the graphic...
Hi all,just found an error preventing the adc from working properly when the driver is generated by STM32Cube FW_G4 V1.5.2 (and 1.5.1).there are some missing lines like this one:sConfig.Channel = ADC_CHANNEL_2; you can compare my 2 attached files to ...
I have modified the SBSFU for STM32G4 to use external flash. I have firmware updates working, but when i turn on SFU_MPU_PROTECT_ENABLE, I get a 'SFU_EXCPT_MEMORY_FAULT' at the following line within HAL_QSPI_Init(), where the QSPI registers are modif...
I'm unable to add the Mongoose HTTP Library as a Third_Party Middleware and then generate code. How can I fix this?- Create project for NUCLEO-G474RE- Generate Code (Makefile) - working- Copy unpacked mongoose source code (https://github.com/cesanta/...
Hello,I tried to change the board in my project from STM32G474CC to STM32G473CC. Both should be pin compatible. I've read different solutions for this in the forum but non of them work. Also the description in UM1718 chapter 11.9. When I follow the s...
HRTIMe1 Interrupt needs HRTIM-MASTER Interrupt to fire?I saw similar issue in GitHub but it pertains to Source of fault.Anyway, I am using STM32G4 V1.3 on STMcubeIDE V1.5.1 on win10 machines (2 PCs)It seems that HRTIM-E1 will not fire up the interrup...
Cubemx 6.10.0 generates wrong constant "OPAMP_POWERMODE_NORMAL" for STM32G471 when using LL liberary. I should be LL_OPAMP_POWERMODE_NORMAL
Hi all,I'm encountering a strange behaviour of STM32CubeMX: from some point on, every time I update the IOC file the generated code is missing the FDCAN function name HAL_FDCAN_GetRxMessage.Obviously this results in a build error; the function declar...
STM32CubeMX version: 6.10.0Firmware version: STM32Cube FW_G4 V1.5.1 I have configured a GPIO pin as EXTI and configured that the interrupt should not be enabled when initializing the GPIO, (i.e. removed the check mark from "Generate Enable in Init")....
Controller:STM32G473RET6IDE:STM32CubeMX+Keil（LL library）Using DMA1 channel 1, copy the data collected by the ADC during half transfer interrupts and transfer complete interrupts.Discovered that half transmission interrupts and full transmission inter...
