STM32U0 is the first Cortex-M0+ with a static consumption of only 160 nA in standby mode with RTC (Real-Time Clock) and 16 nA in shutdown. It also achieves 118 points in CoreMark and targets SESIP level 3 and PSA level 1 focusing on firmware code pro...
Posted on April 02, 2011 at 06:26Hey everyone!This is my first time here and a complete novice with this microprocessor.We are using it (STM32VLDiscovery) for our Senior Design Project in Electrical/Computer Engineering. We just switched from anothe...
Posted on April 05, 2011 at 13:47Hi, While using standart peripheral tim library, i have noticed that the folloeing OC modes are avilable: TIM_OCMode_Timing.TIM_OCMode_Active.TIM_OCMode_Inactive.TIM_OCMode_Toggle.TIM_OCMode_PWM1.TIM_OCMode_PWM2.C...
Posted on April 01, 2011 at 19:17All: I'm trying to get my STM32Discovery board to talk to a NewHaven LCD display/controller C0220BIZ-FS(RGB)-FBW-3VM via I2C and have encountered some problems. I managed to piece together the following code from var...
Posted on March 04, 2011 at 14:42 Hallo, I have installed MDK-ARM 4.14 on Win XP and using a STM32- Discovery board. My problem is the Flash download of my project: When I run download as ''normal'' user I get the ErrorMessage (PopUp) which says: ''...
Posted on March 28, 2011 at 18:38Hello everyone.I'm trying to get the gpio's working on an external target (st32f103zd).I'm using the Atollic Truestudio lite STM32 discovery ide.The code i'm using works fine on the ''internal target'', the mcu on th...
Posted on February 28, 2011 at 01:03Hi, I want to use the board on top of a ''motherboad'', so I need STM32 VL Discovery layout (or just P1, P2 and P3 layout dimensions), where can I find it? thanks in advance.
Posted on March 25, 2011 at 19:58I am new to all of this. I got the board from a classmate.I am trying to store accelerometer data in the flash during an experiment. Then, retrieve it when I plug the board into the computer via the USB. I am struggl...
Posted on March 25, 2011 at 06:27Wrong figure of STM32 reference manual in CAN section.
Posted on March 14, 2011 at 16:20I've got STM32F103RET6 chip, 72 MHz, 512K flash and 64K RAM. The chip seems to be pin-to-pin compatible with the STM32F100RBT6. What if I replace the original chip with this more powerful one? Has anyone ever tried t...
Posted on March 24, 2011 at 19:22Time between FSMC bus accesses
