Posted on September 23, 2014 at 11:46After installing the STM32Cube plugin for eclipse. I would like to know how do we generate the C code for the eclipse platform. from (STMCube) PROJECT-Generate C Code - in the tool chan/ IDE we dont have eclipse...
Posted on August 01, 2014 at 04:22I'm using STM32CubeMX v4.3 to generate my STM32F303x custom board pins.I need both USB and CAN enabled.I can set USB (as FS Device) pins as: PA11: USB_DMPA12: USB_DPAnd CAN pins as: PD0: CAN_RXPD1: CAN_TXBut for...
Posted on July 31, 2014 at 14:11I'm using hardware controlled NSS in STM32F3. To have it enabled I need to set hspi3.Init.NSSPMode = SPI_NSS_PULSE_ENABLED; in the initialization routine. Since there is no option in Cube to set this the line get ...
Posted on August 31, 2014 at 23:29 Hi Everyone im new around here. I own a Discovery kit for STM32F407/417and I have a problem getting the usart to work, ive used STM32CubeMX to genarate all the initialization files along with FreeRTOS (w...
Posted on September 02, 2014 at 11:22I'm using STM32Cube to generate simple USB MSC project. I'm using STM32F417VG.So I'm selecting USB_OTG_FS - Device_only and USB_DEVICE - Class For FS IP - Mass Storage Class. Then I'm generating source code, comp...
Posted on August 08, 2014 at 08:45I see a lot of talk about STMCube on here, and I am sure its exciting for ST to be developing this new product. But, this is NOT ready for professional level embedded engineers that need to ship products that work. ...
Posted on August 23, 2014 at 01:14I am trying to configure a new project in STMCubeMX which will utilize the FSMC Nand module. I have several other peripherals obviously and the code generation works fine until I enable the NAND module. I can enable...
Posted on August 12, 2014 at 11:42I have implemented USB FS CDC on STM32F405 (OLIMEX H405 prototype board) using CubeMX. A LED indicates (hUsbDevice_0->dev_state == USBD_STATE_CONFIGURED) and a communication with VCP on PC works in both directions. ...
Posted on July 31, 2014 at 16:55I'm using STM32CubeMX v4.3 to generate my STM32F303x custom board pins.I need both USB and CAN enabled.I can set USB (as FS Device) pins as: PA11: USB_DMPA12: USB_DPAnd CAN pins as: PD0: CAN_RXPD1: CAN_TXBut for s...
Posted on August 07, 2014 at 22:42STM32CubeMX ver.4.3.0 / STM32Cube V1.0Generated the attached STM32CubeMX project file.Upon reloading the project the Clock Configuration tab is empty - it does not show the clock tree info.What should I do to fix th...