Posted on February 03, 2015 at 12:01When i try to generate basic code for my STM32F429-DISCO board, CubeMX 4.6 software not generate any main.c file sometimes msp.c not be generated too !My toolchain is: Keil MDK5.13 - new updateIs it because my too...
Posted on January 28, 2015 at 14:37Does anyone know if there is any planned support for the Keil MCBSTM32F400 within the STM32CubeMX application? #diy #stm32cubemx #mcbstm32f400
Posted on October 27, 2014 at 00:34I am trying to get a USB CDC Device demo working on an STM32F4 Discovery board (with the STM32F407) with code from the STM32CubeMX generator application. The process has been murky at best, hopefully one of you can...
Posted on December 13, 2014 at 21:21 STM32CubeMX 4.5.0 generates the following code for multichannel ADC /**Configure for the selected ADC regular channel to be converted. */ sConfig.Channel = ADC_CHANNEL_1|ADC_CHANNEL_6|ADC_CHANNEL_8; ...
Posted on August 23, 2014 at 10:14Does somebody know when the F1 devices will be completely supported on STM32 Cube(i.e. STM32F103)? #stmcube-stmcubemx #stm32f1
Posted on November 06, 2014 at 13:34When selecting the number of channels in the ADC configuration window the automatically generated channel fields are off-by-one, e.g. select 4 channels, there are 3 fields generated, here is the demonstration: Tha...
Posted on December 04, 2014 at 10:33I am developing an application using the Serial Audio Interface of the STM32F429ZITx.There appears to be a problem in the code generated by STM32CubeMX.The DMA handle hdma_sai1_a is declared as a global variable i...
Posted on January 06, 2015 at 07:27I want to use the ADC and UART for sending the converted data back to PC and display the same data to the LCD screen. Which peripherals and components are to be selected in ''Pinout'' after selecting the board? ...
Posted on December 08, 2014 at 19:59I thought it would be instructive to look at the examples using the STM32CubeMX application. The ''Load Project'' dialog only looks for .ico files and I find none in all of the examples. Was this application used ...
Posted on December 12, 2014 at 11:46 Hi, I'm trying to migrate an existing project from the Standard Peripheral Libraries to the new ones and can't fine any guides. Do any exist? As an example I'm currently trying to convert this...