Posted on September 01, 2016 at 07:29Hi, I have a hands-on document about cube mx. I am trying to configure wwdg as my hands on document tell me. But there is a configuration bug I guess, cos after I enable wwdg it fires immediatly. (I have a bare p...
Posted on August 17, 2016 at 09:01After generating code using CubeMX 4.14.0 for an STM32F030C6, I noticed a bug in using the blocking (non interrupt or DMA) functions for SPI.When switching between using the functions HAL_SPI_Transmit and HAL_SPI_Tr...
Posted on July 20, 2016 at 00:51I am using STM32CubeMX to generate code to create a USB CDC device on the STM32F4x9I-EVAL MB1045 Rev B board which has a STM32F429VGT6 microcontroller. For testing I connect the OTG FS1 USB connector on the STM32F4x...
Posted on May 30, 2016 at 21:28Hello again, yesterday I updated to the newest version of CubeMX (v4.15.0) and since then in my project the clocks for the SDMMC and the STM32F746ZGT are disabled. In the pinout I selected the 4-Bit wide mode but the c...
Posted on April 23, 2016 at 23:45Hello all, in version F4 1.11 the code for SPI has been changed from WaitForFlag execution style to if loops. (see Release Notes) While this sounds ok it causes malfunctioning codesequences. The problem is in Trans...
Posted on February 16, 2016 at 14:58The MX_FATFS_Init function is beeing called in the main function and again in the default task. After the second call the SD_Path is invalid. I'm using CubeMX 4.13.0 with the STM32F417IGH6, the configuration is in...
Posted on January 19, 2016 at 11:33Hello,I couldn't find bug/issue tracking system for CubeMX, so I place report here.Description: When generating initialization code for TIM4 in input capture mode (channel 1 direct, channel 2 indirect), HAL_TIM_Ba...
Posted on January 14, 2016 at 09:55My installation of STM32CubeMX is not working. I tried to reinstall the application but the Windows Control Panel -> Programs and Features Uninstall function does not work. I deleted the installation directory manu...
Posted on January 23, 2016 at 15:27CubeMX: 4.12.0STM32Cube_FW: F3_V1.2.0MCU: Stm32F303VCT(stm32-f3-discovery)I configure OPAM4 to ''PGA not connected'', Non-inverting input is configured to PB11.Cube generates code: hopamp4.Init.NonInvertingInput =...
Posted on October 14, 2015 at 05:20I am using Cube, everytime that I make a small change in the cube project and regenrate the code, it generates this line in stm32f1xx_hal_msp.c /**DISABLE: JTAG-DP Disabled and SW-DP Disabled */ __HAL_AFIO_...