Posted on April 29, 2015 at 20:36 Hey, i encountered a problem using the CubeMX Eclipse plugin. When I made some changes to the startup code using the eclipse plugin and generate the Project code, opening braces are removed. Mayb...
Posted on May 26, 2015 at 04:35Hi All,I have generated code for a USB HID device, but it does not do anything, I mean my PC does not recognize anything. I have not changed anything in the code because I was assuming that it should at least get detec...
Posted on May 10, 2015 at 15:24Hello, I decided to start a new thread just to inform an issue I have just found out. I am not the only one who is getting a bunch of errors when trying to compile with Keil a code whose template has been generated v...
Posted on May 22, 2015 at 05:56//-------------------------------------------------------------------------------------------------------------- /* USER CODE BEGIN USART2_MspInit 0 */ /* USER CODE END USART2_MspInit 0 */ /* Peripheral clock enab...
Posted on May 07, 2015 at 12:54Hello,Has anyone tried to use the temperature sensor on STM32L1 devices with the latest CubeMX and library?It's giving me bogus results (-2C on my desk), while on older versions it worked normally.Chip is STM32L151RCT6...
Posted on May 03, 2015 at 19:53Hello, I have an olimex E407 board featuring stm32f407zgt. I create a simple application using cubeMX and want to ping. The board receives packets (I can see this using LWIP_DEBUG functionality) but the TX does not wor...
Posted on May 02, 2015 at 05:30I am using the STM32F1DISCOVERY and generating a project for IAR from STM32CUBEMX. I have changed the configureation to use timers and added a toggle LED command in each of the default task and timer methods, however n...
Posted on April 16, 2015 at 13:25Dear all,I have many problems using STM32CubeMX and Keil MDK5. I'm trying to start defining all the peripherals with the STM32Cube (is intended for this), then I run code generation for Keil MDK5 and finally I open t...
Posted on August 28, 2014 at 15:57Hello, currently I'm porting a STM32F103ZG / Wiznet W5300 Ethernet and SPL based to a STM32F429ZG / STM32CubeMX / LwIP based application. Both versions using FreeRTOS. In both cases its a custom board. I'm struggli...
Posted on March 25, 2015 at 20:45Hello,I'm using an STM32F415 and CubeMx. I've got the HAL_SPI_TxRxCpltCallback() working in that it gets called after the proper number of bytes have been clocked out of the SPI Slave, however, when I prep for anoth...