HI,First time user stm32l4 nucle and I struggle to get DAC1 out2 processor voltage (using CubeMX and HAL). Is my problem due to bridge 18 of A4 and D4 or there is something wrong with stm32l432?. DAC1out1 works as programmed but not out2. As A4 and D...
I cannot select SCALE 2 for Vrefbuf. By the way, I would like to ask how I can set Vdd as the reference voltage for DAC?
if (HAL_DAC_Start(&hdac4, DAC_CHANNEL_1)) { /* DAC conversion start error */ Error_Handler(); } if (HAL_OPAMP_Start(&hopamp4) != HAL_OK) { /* OPAMP start error */ Error_Handler(); } HAL_TIM_Base_Start(&htim7); // while(1) /...
Hi everyone,I am currently trying to generate a white noise using my Nucleo STM32L152RE but I do not reach to achieve it.I used CubeMX to create the init functions.You can see attached the settings for the DAC ( using the OUT1 configuration) in cubeM...
I've adapted the DAC signal generation example from the HAL samples to my project, but I cannot get any signal from DAC2.Using CubeMX, I configured TIM6 and DMA1 like this:/* Includes ------------------------------------------------------------------...
Posted on July 06, 2015 at 10:05STM32f407VG diskovery ?an somebody give an example of DAC without using DMA generated in CubeMX? #stm32 #cube #dac #stlink #stm32cubemx