Its ectremely clever from you to release an update without really testing it and its not even simple bug. its huge. try create project for the STM32H747 Discovery and u see by your self!!
I am trying to setup stm32h745 Nucleo board. Is the yellow triangle issue of concern or not ?I am using internal oscillator.
In the reference manual: https://www.st.com/resource/en/reference_manual/rm0468-stm32h723733-stm32h725735-and-stm32h730-value-line-advanced-armbased-32bit-mcus-stmicroelectronics.pdf there is a clock symbol mentioned called: spdifrx_symb_ck which is ...
Hello,Im working on a Project, which i use with it STM32F750N8H6 with external Memory and im trying to interface them to each other.I have so far now done the Configuation of GPIO, TimingParameters..etc but i wanted giving too the Value of the Clock ...
Apparently in v2.8 TF-A the RCC device tree block changed significantly for the STM32MP157CAAx board as this commit shows:https://github.com/STMicroelectronics/arm-trusted-firmware/commit/3cf2edd6b87ca5c131108c533761d26cb0539d5eSo old device trees fr...
Are the LL drivers for RCC ready for production code (I plan to use the STOP mode using the LL drivers ...)?There seems an issue with stm32cubemx 6.8.0 generated code for the NUCLEO L476 dev. board in SystemClock_Config() when selecting RCC LL driver...
I'm trying to create a very simple baseline project for an STM32L552CCTx MCU: FDCAN1, USB (device), SWD and a LED. No HSE / LSE clocks present. The 'Clock Configuration' tab works well and a proper clock is found, but in the 'RCC' configuration the p...
I'm configuring an STM32U575 within the STM32CubeMx tool where the HSE clock is being used. I'm trying to enable the CSS for the HSE clock via the Clock Configuration menu, however enabling/disabling the CSS via this tool doesn't seem to actually set...
I tried to enable spi 1 and I get this, but everything seems to be configure?