Ask questions and find answers on ST MEMS sensors, such as the LSM6DSV and the LSM6DSL. Learn how to use the SensorTile.Box, and STEVAL kits.
Hi!Me and my team are currently working on project which include LSM6DSO32 sensor. There's two parameters that don't seem to be listed in datasheet or application note:1) Data latency [ms] - time between the moment the sensors are sampled and the mom...
1) Here is the picture of the device marking of incoming chip. Could you explain what each line means? The datasheet of ISM9DS0TR does not have any related info. This is holding our incoming quality check. 2) When was ISM9DS0TR EOL? Thanks much!
Enabling "step counter detection" on lsm6dsr using the application note [1] "basic SW routine" does not seem to work (1-13 routine steps). Device always reads the value: 2C00h from registers 62h and 63h. Any pointers on how to debug the issue?[1]: ht...
The iNEMO inertial module LSM6DSRX supports sensor synchronization S4S for Qualcomm. Sensor data sheet mentions following S4S registers without much detail.S4S_TPH_L (04h) Sensor synchronization time frame register - low byte (r/w)S4S_TPH_H (05h) S...
Hi,In the company where I work we are developing hardware and we are already evaluating the LIS3DH in order to put it in our hardware devices. However we have noticed that the LIS3DH is obsolete but there is the LIS3DHTR which is the same product but...
Hello,I am using LIS2DH12TR through SPI but I am not able to operate it on greater than 2.8V. On greater than 2.8V I am not able to read the device ID. But according to the datasheet, it is able to operate up to 3.6 V. SO how can I use this ic greate...
Hi,I have a STPM33 on some of my PCB and I have issue with some of them when it gets too hot. The actual datasheet tells us that the operating temperature range is -40C to +105C but I've found an old one of October 2013, another of October 2014, anot...
Hi, can anybody tell me what partnumber this is. The chip is a LGA-14 package with the "SO" marking. It is probably an accelerometer.I aslo tried to read the 2d matrix code and it says: 781120R903QE
