About Smalik

Smalik · 2024-11-01

I am currently working with the STM32WB55RGV6 microcontroller, which has a total of 1 MB of Flash memory. However, after generating a project using STM32CubeMX, I noticed that the Flash memory file only indicates 512 KB of available memory.Could you ...

Smalik · 2024-07-17

Hello,I want to read which stack is updated in my controller. For example stm32wb5x_BLE_Stack_full_extended_fw / stm32wb5x_BLE_Stack_light_fw / stm32wb5x_BLE_Zigbee_RFD_static_fw. So can I read back the stack name using code? Is there any way to read...

Smalik · 2023-12-26

Hello,I ordered this IC for one of my products and am confused about the SPI modes. In the datasheet, it is mentioned that it will support SPI mode 0 and mode 3, but I have not found any timing diagram of SPI mode 0 in the datasheet. Can you provide ...

Smalik · 2023-08-16

Hi there,I was working on the LIS2DH12 for one of our applications and found that the LSI2DH12 is not able to work on a supply voltage greater than 2.7V. Is there any condition to operate the device on a voltage greater than 2.7V? In my application, ...

Smalik · 2023-01-17

Hello,I am using LIS2DH12TR through SPI but I am not able to operate it on greater than 2.8V. On greater than 2.8V I am not able to read the device ID. But according to the datasheet, it is able to operate up to 3.6 V. SO how can I use this ic greate...

Smalik · 2024-11-03

Can you explain how we can adjust the boundaries and which type of performance it will impact?

Smalik · 2024-11-01

Thanks for the reply, Could you please provide clarification on how the remaining memory is allocated among different sections?

Smalik · 2023-12-28

No, I do not wanna play with settings. Actually, the problem is I have another IC that is also configured on CPOL 0 and CPHA 0. So, on the same SPI line, I want to connect this IC. So that's why I want to confirm whether it will work on CPOL 0 and CP...

Smalik · 2023-12-28

I know it will work fine on CPOL 1 and CPHA 1. but my concern is whether it will work on CPOL 0 and CPHA 0 or not. RegardsSarthak

Smalik · 2023-12-28

Hello, Thanks for the reply. So, is it working fine on SPI Mode 0, that is, CPOL =0 and CPHA =0? and if it is working fine, can you provide me the timing diagram of the SPI Mode 0? RegardsSarthak Malik

User statistics

User Activity

Flash Memory Configuration in STM32WB55RGV6

Unble to read the Wireless satck Name in STM32WB

LSM6DSO - SPI Modes Issue

LIS2DH12 : Not able to communicate with the device when the supply voltage is greater than 2.7V.

LIS2DH12TR- Not working on 2.9V and above voltages

Re: Inquiry About Flash Memory Configuration in STM32WB55RGV6

Re: Inquiry About Flash Memory Configuration in STM32WB55RGV6

Re: LSM6DSO - SPI Modes Issue

Re: LSM6DSO - SPI Modes Issue

Re: LSM6DSO - SPI Modes Issue