does MEMS studio support STEVAL-STWIN KT1B board ; cause according to the UM (https://www.st.com/resource/en/user_manual/um3233-getting-started-with-memsstudio-stmicroelectronics.pdf) only STEVAL-STWIN KT1 Hardware compatible (not with full/reduced s...
Hi Team,I want to evaluate LSM6DSO16IS, I found one expansion board X-NUCLEO-IKS4A1 already mount this sensor and have corresponding software and projects accordingly, additionally in projects could use NUCLEO-F401RE board to communicate, but seems i...
Hello, I am trying to use the MEMSMIC1 example on my nucleo-wb55 board, specifically the microphones streaming exampe to record sounds with audacity. I am able to compile and run the code. I am also able to see the microphone show up in the device ma...
Hello, I want to use the SensorTile.box to collect IMU data over BLE. I tried modifying the BLESensors source code to suit my requirements (by increasing the characteristic size etc.). But the ST BLE Sensor app doesn't seem to support this. I only re...
I created a CO sensor application with stm32wb55rg, and I am using ST BLE Sensor for plotting and visualizing. I also want to send my log data to AWS IoT. When I go to the AWS IOT tab on the cloud logging page of the BLE Sensor, I am facing an "inval...
Just want to know if a STWINKT1B Kit can be configured to connect to a STM32MP157C-DK2 with X-LINUX-PREDMNT
What I have:SMT32 CubeIDE 1.3.0the P-L496G-CELL02 eval kit with the Quectel BG96 on STMOD+ connectorthe X-cube-cellular examples for connecting the board with the cloud via MQTTan STEVAL-STWINKT1, which I want to connect via MQTT to our cloudserviceW...
Hello,I am using a STEVAL-STWINKT1 connected to ST cloud: DSH-PREDMNTI want to increase the number of devices and time of use, is this possible? what is the procedure to do it?If not, do you provide the APIs to implement it in my own dashboard?can t...