Dear ST,We found that when we execute NVIC_SystemReset(); there will be a random CPU hang. In order to eliminate the problem of whether it is developed for our program,I used the lorawan at slave routine, and after compiling it directly,When I execut...
According the the Lora Logo guide from Semtech, one can apply on the use of the logo if one is using a RF IC of Semtech. https://blog.semtech.com/how-to-name-and-brand-your-lora-applicationDoes this also hold true for the STM32WLE which integrates Se...
Hello, I am working with RAK3172 which has STM32WLE5CCU6, from CubeMX I am enabling it's SUBGHZ_Phy functionality. But after code generation I am seeing there are two files "app_subghz_phy" and "subghz_phy_app", what are the differences between these...
Hello, I have a trouble using the listening mode of the Sub-GHz radio module to wake-up the STM32WLE5CCU6 MCU from the standby mode. My MCU is configured to wake-up on RFIRQ (EWRFIRQ = 1).My radio module is configured in listening mode with a 15 seco...
hello everyonei try to make same ping pong dual core example but my project not working can you help me to found the problem"there is not fault in build and i can run the project but it not working"i did not understan where is the problem
hi ALL I bought three stm32 Lora HF band sensor and gateway pack. I would like to communicate by connecting one gateway (nucleo-F746) and three end nodes (nucleo-L073) directly (no server, no site). Is it possible? And please tell me the example co...
Hello, can somebody help me to select the STM32 controller and it's developer board for my first project that involves:wireless air mouse with keyboard and TV controller?
Where can I find the st-nucleo-lora-gw-atfw-v2.0.2.bin for the NUCLEO-F746ZG board
I have a LoRaWAN end node project with STM32CubeWL MCU Firmware Package v1.3.0.I'm using LoRaMAC version 1.0.4. What confuses me is why my end node device can successfully join to the gateway based on the increment value of the dev nonce.The detailed...
I'm using STM32Cube_FW_WL_V1.3.0and trying to generate LoRaWAN End Node FreeRTOS. I precedently set in file se-identity.h values for LORAWAN_APP_KEY,LORAWAN, LORAWAN_NWK_KEY,LORAWAN_JOIN_EUI, as shown in the guide and everything went fine.Now I want ...