Posted on September 07, 2017 at 09:14I use a P-NUCLEO-LRWAN1 and I-cube-lrwan End_node firmware. It was connect with Semtech lora gateway but rssi is very low and it have some lose of message from P-NUCLEO-LRWAN1. please see result a picture below....
Posted on August 26, 2017 at 01:17The LRWAN tree contains a very old L4 HAL tree, doesn't support L496, also lacks support for NUCLEO 32 and 144 boards.Ported in the V1.8.0 L4 Cube supplied HAL libraries.Got about 90% through a port of the SX1272MB2...
Posted on August 23, 2017 at 09:02Hello, currently im using B-L072Z-LRWAN1 send AT command to multitech gateway and server is loriot.io. And i cant get data at the server.Here some information:Firmware version B-L072Z-LRWAN1 v1.1.1AT command: AT ...
Posted on June 12, 2017 at 15:37Hello,I am trying to use LoRa connectivity with the brand new b-l072z-lrwan1 discovery board. The End Node project works perfectly but I have an issue with the AT Slave project. When I try to send LoRa packet to my Mu...
Posted on June 29, 2017 at 18:12Hello,We've got two B-L072Z-LRWAN1 LoRa Discovery kit boards and we're trying to use the end_node demo project, included in the https://my.st.com/content/my_st_com/en/products/embedded-software/mcus-embedded-software/...
Posted on June 29, 2017 at 14:30Hi Support TeamI want to implement sleep mode in ping pong project , so slave device send some data and go to sleep ..STM32L072CZYX - LORA DISCOVERY boardhow to put the device into sleep mode , please share some docu...
Posted on June 27, 2017 at 11:02Hi Support TeamQuestion 1 :I am using ping pong in ST-LORA discovery kit .I used cubeMx to generate code for reading i2c temprature/humidity sensor , it is working , here /** System Clock Configuration*/void SystemClo...
Posted on June 13, 2017 at 11:05Hello folks,it seems like there is a very important topic not discussed right now. There are LoRa examples for System Workbench for 5 different Boards, which include in the folder middleware all functions of LoRaWAN. ...
Posted on April 24, 2017 at 14:43A lots of time, the timer used to switch off the TCXO of the LoRa Module seems to block the timer utility. As this one stay indefinitely on the head.Did someone see already this problem ?#i-cube-lrwan
Posted on April 25, 2017 at 13:11Hi,I bought two STM32 Nucleo-L073RZ pack boards with expansion LoRa boards. I downloaded from STM32 site the example projects for board and I tried to run project for LoRa called PingPong. This project should start t...