I know that "CFG_TASK_SW1_BUTTON_PUSHED_ID" was set in the header file (/app_conf.h), but just set, no morein the Datasheet the button for Nucleo board SW1 connected to a PC4 pin, but in CubeMX for project "p2p_server" I didn't find any mentions abou...
Hello, we are working on new release of STM32WL "STM32Cube_FW_WL_V1.3.0". release which has introduced changes in RTC driver which we believe is fixed for the issue (RTC loosing time issue STMicroelectronics/STM32CubeH7#24 )But, after running RTC ove...
Hello,we’re doing some research on LoRa tecnology to evaluate if it’s suitable for our products. We’re interested in STM32WLxx MCU, so we downloaded STM32CubeWL Firmware package from GitHub.We are trying to understand the principle of working of some...
Greetings,can you please tell me where can I find the version history for the STM32CubeWL Release v1.2.0?Latest version on GitHub is for v1.1.0.Specifically, changes in the "radio_ex.h" and the related files since your examples on the GitHub repo don...
Calling "aci_gap_additional_beacon_start" first works successfully, but calling "aci_gap_set_discoverable" after that returns "0x0C Command disallowed".If I swap these instructions and set up the main advertisement first, I get the same 0x0C error tr...
Is there any place I can find the source code for OpenOCD bundled with current release of STM32CubeIDE? I'm asking because I think source for this should be provided as it is under GPL, I'm asking since STM32WB is not supported in source available o...
I 've built a Lora sender with Arduino.I want to rebuilt it with STM32 (STM32F030F4P6).So I 'm thinking of starting with the Lora library https://github.com/sandeepmistry/arduino-LoRa .I mean to convert it to Atollic studio code (a class I suppose).(...
How change mbed linker for STM32WB55 to used STM_OTA bootloader (need to add TAG_OTA_START, TAG_OTA_END ...). This is my code but don't work, mbed given my error:; #if !defined(MBED_APP_START) ; #define MBED_APP_START 0x08000000 #define MBED_APP_STAR...