I've been struggling to connect my nucleo board via ST-Link, I've tried uninstalling everything, reinstalling and my computer still won't detect the board when I plug it in. It's always just COM-3 device or whatever port I use. Tried installing the S...
i am using LoRa E5 dev board for programming my code , i am using STM32 stlink debugger with stm32 cube programmer , the board is not connecting my stm32 cube programmer , the serial number is showing 1 but when i am trying to connect it is not conne...
Hello,I have started to use stm32wl55 nucleo.I try to debug a basic application.I start by debugging CPU1 (CM4) than after booting CPU2 (CM0+) i run the debug for the second CPU.But ST-LINK: Could not verify ST device!error details :Error in final la...
I doubt if the ST-link has some setting problems?Model:P-NUCLEO-WB55 PNWB55$CU301:09:41 : Warning: FUS_STATE_IMG_NOT_FOUND, Flash already empty !01:09:42 : Firmware delete Success01:09:42 : Download Stack/FUS image at address 0x80EC000 ...0...
I have just downloaded the reference board from the STM32WB55: STM32WB55RG - Ultra-low-power dual core Arm Cortex-M4 MCU 64 MHz, Cortex-M0+ 32 MHz with 1 Mbyte of Flash memory, Bluetooth LE 5.4, 802.15.4, Zigbee, Thread, Matter, USB, LCD, AES-256 - S...
Hi All!I have some doubts about possible connection STEVAL-L99615C with for example X-Nucleo-IDB05A1. As far as I understand it should works, but I am not sure if it will be possible to get data send by bluetooth to computer and then read them in ded...
I have designed a custom developer board based on STM32WB55CGU6. I have both JTAG and SWD pins on the board. None of them works when I try to connect the board to the STLINK v3MINIE. Except any hardware issues, what else do you suggest for the very f...
STLINK-V3PWR Not able to connect to STM32WL and other STM32 MCU's using STM32CubeProgrammerSame MCU is working with STlink-V3 13:39:13 : ST-LINK SN : 002F004D3431510137383732 13:39:13 : ST-LINK FW : V4J2B1P4 13:39:13 : Board : STLINK-V3PWR 13:39:...
Hi,I am working with a STM32WB55 MCU connected using a STLINK probe (SWD).In the flashing flow, I use STM32_Programmer_CLI to erase the device, put it in FUS mode, update the FUS, update the BLE stack image, and then flash the app image.One thing I r...