Using a Nucleo-F072RB. I am trying to get the output of CC1 to go low after the CPU does something. Everything is working as expected except I cannot get the line to go low. I have tried both variants of the CC1P bit and neither seems to work. I ...
I am looking for copy of schematic of Nucleo 030R8. I am in the process to design my custom board but I need reference design to check application circuit of STM32F030RCT6TR ThanksSyed
Hi everyone,First, here is my set up:computer: windows 10uC: STM32F030K6T6flashing/debugging hardware tool: ST LINK v2 ( from nucleo board)I have noticed that it takes almost 30 secs to do same operation using CLI (wether directly launching a batch f...
Hi,I'm having issues connecting the STMEVAL002V12 kit (brushless motor driver containing a STSPIN32F0A) to the V3MINIE debugger. The programmer is found (using STM32CubeProgrammer on Win11), and has been updated to the latest firmware (V3J8M3).To con...
Hello guys, I have Nucleo F072RB, when I first bought it, it works fine when I plug it to PC. But today, When I plugged USB cable, LD1 blinks in approximately 1 HZ and LD3 remains red. I have searched it on the internet but I couldn't find a solution...
Hi, I am MURALI SELVAM, I need a Reference design for STM32F072V8T6, Anyone who has a reference design, Kindly tell me, Thank you.
Can we have the Altium project for STM32F0Discovery?Thanks
I want to program my STM32F091CC with the ST Link/V2 through Arduino. I downloaded the stw-link009 software and I can push Arduino code to the STM32. The problem is that I can not get serial communication so I can see serial prints or debug my code. ...
Does the STM32L072VBT6 or STM32F072VBT6 not allow for the USB connection to function, even when VDD is OFF?
The STM32F042K6 has been giving me issues lately when it comes to using the UART module. USART1 is not working and USART2 only transmits. Has anyone encountered the same problem? I have attached a sample code I was using to test USART2 for both trans...