Posted on July 12, 2018 at 22:27I am trying to connect to my running application and read some variable values from RAM. I am using ST-Link CLI with HOTPLUG option, but the core gets Halted after connect and the RAM content is invalid. The programme...
Posted on June 19, 2018 at 22:47I'm trying to connect ST-Link/V2 ISOL using SWD to a STM32F030R8T6 without success using Utility. When I go to Target -> Settings, the serial number is shown. However, after pressing the Refresh button, Here's how I ...
Posted on May 04, 2018 at 10:22It seems that in my Nucleo board the embedded debug interface (the USB) is broken. How do I connect an external ST-LINK/v2 to the board to be able to flash SW and debug? The debugger should also power the board.#st-lin...
Posted on November 28, 2017 at 11:03I have a STM32091C-EVAL board, and I'm trying to get console output on the STLink-2.1 debug console interface throught USART5, but I have no output by the STLink.- I have updated the STLink firmware to the latest ...
Posted on September 16, 2017 at 13:25Greetings People,I am trying to program my target device STM32F030R8 using Discovery F0 Board. I have removed CN2 jumpers and connected my target device to CN3 pins♯ 1,2,3,4,5. I have left out pin 6 which is not ...
Posted on December 09, 2016 at 19:31Hello everyone,I am using stm32f030k6...When I am using ST-Link debugger and go into debug state, the Keil IDE goes to an assembly file 'startup_stm32f030x6.s ' and get stuck there right at the line:LDR R0, =...
Posted on September 18, 2016 at 02:39HelloI just joined the forum and I am new to ARM. I followed ARM tutorials using this link I am using CoIDE V2 for beginner development, I was having problems trying to download the program to the STM32f030 MCU....
Posted on September 16, 2015 at 00:04Hi.I have just upgraded one of our boards from using the STM32F030C8T6 to the more or less pin-compatible STM32F030CCT6.The only change that had to be made was to supply the one extra power supply rail to pin 35 ...
Posted on June 20, 2012 at 22:59First post here. I have been programming the stm32f0 discovery kit for a few days now using the Atollic gdb server with no problems whatsoever, that is until today. I was in the middle of debugging and lost the link ...