Ask questions and find answers on ST MEMS sensors, such as the LSM6DSV and the LSM6DSL. Learn how to use the SensorTile.Box, and STEVAL kits.
Good day, I'm currently reading data on the FIFO using Continuous-to-FIFO mode. I'm also using the lsm6dsm_STdC provided on Github. I'm doing the tests using the STEVAL-MKI189V1I've set up the FIFO to only read Accelerometer data for now. While testi...
I need to communicate by I2C my board that contains the LIS3DH accelerometer with the MKI109V3 adapter board. In order to evaluate if the sensor readings are correct.From what I understand, the MKI109V3 evaluation board allows communication via SPI a...
Hi,looking in the AN5902 Finite State Machine application note for LIS2DUXS12, rev 3 on page 47, it is mentioned that using the Adaptive self-configuration (ASC) it is possible to switch from Ultra Low Power mode to High-Performance mode. However, in...
I have connected X-Nucleo-IKS02A1 to Nucleo H563Zi.When I am trying to initialize the MotionCP library using MotionCP_Initialize() function, it is not getting initialized and I couldn't step into it.But when I initialize IKS02A1_MOTION_SENSOR_Init(IK...
I'm trying to get an accelerometer connected to my Nucleo-g070RB. I've got the STEVAL-MKI164V1 board with a LIS2HH12 on it.The problem I have is I always get either zero of 0xFF when try to read the device ID (WhoAmI) which is not correct.The 2 board...
Recently, I created a driver for the lis3mdl sensor. The sensor is providing data, but there are issues with the temperature readings and potentially with the magnetometer data. I don't have prior experience with magnetometers, so I'm uncertain if t...
Hi ST experts,Is there any sample codes available for IMU?I checked the info of X-Cube-MEMES-XT1 is already NRND.
I have examined the FSM example folder on github and, while there is an example for an external magnetometer, I haven't found any examples for an external barometer. Is there such an example? And if so, where can I find it?I believe I can create my o...
Sometimes, I am reading zeroes from IIS3DWB FIFO. I thought maybe it is because I am using a protoboard (using MKI208) so I connected it directly (with cables) to RPi 4 but it still happens.I guess it is not normal to find these in FIFO, can it be du...
