Ask questions and find answers on ST MEMS sensors, such as the LSM6DSV and the LSM6DSL. Learn how to use the SensorTile.Box, and STEVAL kits.
Posted on March 09, 2018 at 02:38Hi. Probably know by now that due to the lithium battery that is onboard this kit, Digikey and Mouser will not ship to Canada. Same mistake made by Nordic for their Thingy kit.Suggestion : Perhaps next time / future ...
Posted on March 08, 2018 at 08:17can anyone suggest gps sensor compatible with X-NUCLEO IDS01A5 expansion board?
Posted on March 07, 2018 at 14:58Hello Sir/Madam,Currently we are looking for angle measurement sensor.for this we thought that gyroscope will be best option. if we thing something wrong then let us know.Now come to the point, We required angle meas...
Posted on December 09, 2013 at 13:14Hello to all, In order to ease the self learning process and set up ST's LIS3DH, attached to this post is an example of the drivers setup for a general application. Thank you, Thiago Reis #lis3dh #setup
Posted on March 07, 2018 at 13:10Hi Sir,I am using ST accelerometer Sensor LIS3DH (adapter board STEVAL-MKI105V1).From the data sheet 'DS6839_MEMS digital output motion sensor_ultra-low-power high-performance 3-axis “nano� accelerometer', -----...
Posted on February 28, 2018 at 09:02Hello,I'm currently testing the LIS2DH12 accelerometer, which is mounted on the MKI151V1. The board is connected to a SPI/I2C device from National Instruments because I want to integrate the sensor in a LabVIEW me...
Posted on March 04, 2018 at 22:07Does anyone know where can I download the VL6180X API example code?The product page does not have the download link.http://www.st.com/content/st_com/en/products/embedded-software/proximity-sensors-software/stsw-img00...
Posted on May 24, 2017 at 22:07With the configuration below I'm attempting to receive and interrupt from INT1 when there is acceleration along the Z axis. However INT1 alwyas stays high...Not sure whats going on//ctrl_reg1 LIS3DH_WriteReg(LIS3DH_CTR...
Posted on February 28, 2018 at 18:37Hey there!Can anyone explain to me how to calculate the correct acceleration values in mg for various resolutions and scales?For example, I am currently reading acceleration values with ODR set to 0110, which is ...
Posted on February 25, 2018 at 09:01Hi,unicleo not working in FFT mode with (&sharpIKS01A2+ NUCLEO-F401RE with STM32CubeExpansion_MEMS-XT1_V4.2.0) and its user message window is showing ''AST Protocol: CHK_CheckAndRemove Failed''.FFT plot is not sho...
