Ask questions and find answers on ST MEMS sensors, such as the LSM6DSV and the LSM6DSL. Learn how to use the SensorTile.Box, and STEVAL kits.
Hi,Like the post https://community.st.com/t5/mems-sensors/anyone-have-v1-3-1-mems-studio-for-download/m-p/745081 , I search the older version v.1.4.2 of MEMS-STUDIO for documenting my project. Does anyone have the installers of this version ?Thanks,l...
Hello, Is it possible to add the download links for the old versions of all your software's and resources, like it's the case on the web page of STM32CubeIDE ? In my case, I search to download the versions v1.4.1 and v.1.4.2 of MEMS-Studio for docume...
Dear all,I am using SensorTile.box STEVAL-MKSBOX1V1 with St app.I made application with vibrometer and output to USB.but the problem when I receive this data with Python code.there is byte misaligned in x,y,z because I started to receive data after s...
dear all, i want to recoed acceleration date from LSM6DSOX . i made app on st app and made output rate 6666 and output stram to usb. the proplem is i use python to read date from port with serial but the bytes mismatch because the sensor starts strea...
We need ~50k 6-axis IMUs for an application that will experience > 2000dps yaw rate and highly dynamic motion. The spec sheets for the ISM330BX and LSM6DSV32X seem to not paint a complete picture regarding the angular zero-rate at different G_FS angu...
We are currently working on integrating the LSM6DSV16X (IMU) and IIS2MDC (Magnetometer) sensors into our platform based on NXP’s i.MX8MM SoC running Android 10. As Android 10 uses the legacy HAL, we’ve followed the integration steps as per the READM...
Hello everyone,I'm currently in the process of integrating the ISM330BX IMU to a sensor i'm developping.So far, I have been able to implement this component to my design, communicate with it and read acceleration/gyroscope data.However, the reason th...
We have procured STEVAL-MKI197V1 I3C device to validate I3C on the AMD platform, and we have found the slave driver support from the st website and below is the link shared for the same.https://github.com/STMicroelectronics/st-mems-android-linux-driv...
I am using the kernel driver for accelerometer i need to find the accurate step count.Below are the reading for accelerometer from the driver from sysfs parameters and how can i find the step count,root@antler_xedge:/sys/bus/iio/devices/iio:device2#l...
Dear All,We are using the IIS3DWB MEMS accelerometer in one of our products and have encountered an issue with a single unit that we would like your input on. Issue description:On this specific device, the X-axis always reports the maximum negative v...
