Hi,I am using STM32F101VD to communicate via I2C with MPU6050 IMU device. Data transfer (reading and writing) is done using DMA. Additionally I connected one of my ST32's GPIO (configured as EXTI - Rising IT) to MPU's INT pin. I am using HAL librarie...
HI All,I'm using LIS2DW12 sensor with STM32 controller. sensor is interfaced with SPI protocol. I'm using DMA to read sensor output. SPI is configured and tested with 8MHZ and 16Mhz clock frequency. For 16Mhz clock I'm able to read data from the sens...
Posted on July 17, 2017 at 16:25Hello,I try to read acceleration values from a LIS3DSHTR using the STM32F091 �C. I use SPI with DMA to read the values but I have trouble with the incoming datas in the RxBuffer.On my two screenshots you can see the b...
Posted on March 18, 2017 at 11:51Hi all,I am attempting to build a microphone array out of digital MEMS microphones and I am trying to determine if I can achieve a reasonable system on an STM32F7 microcontroller. Ideally I would like to capture the ...