I'm trying to use touchGFX with an ILI9341 using SPI. I've gone through the steps to create my timer to call touchgfxSignalVSync() but I get the warning: implicit declaration of function 'touchgfxSignalVSync'. Is there something that needs to be inc...
I'm using touchgfx 4.22 on a stm32h755zi mcu. The touchgfx run on the M7 core. The mcu is running at 480MHz.The board is an internal board with a 800x480 display connected in parallel to the LTDC interface with a 18bit bus as shown below:I use an rgb...
Hello,I am working on H750 while the flash is limited.Because the LCD is RGB565, may I know if the the unrelated functions can be removed? such as functions related with ARGB8888 and RGB888. Thanks.
Can I use memory data sections in the SIMULATOR of TouchGFX? I want to add something like{ setError(1); // 1 will be replaced by an unique constant (enum) #if USE_ADD_INFO_FOR_ERROR ADD_INFO_FOR_ERROR(1, "some explanation for error 1"); ...
Hi.I am using SDRAM, OctoSPI and 24bit RGB888 TFT screen. Project is working normally with another widgets (button, shape, text area, image etc.). Now i want to use video decoding and video widget. I made the necessary cubemx settings by reading the ...
Hello everyone,I recently downloaded TouchGFX version 4.23.2 and tried running the example on my STM32F7508-DK. However, when I click the simulation button, I encounter these errors. Can anyone help me with this issue? I'm running TouchGFX on Windows...
Hi all,as I'm stil new to STM and TouchGFX I'm facing the following problem.The GUI was developed using a EVK070016 Kit. This board uses a dispay resolution of 1024 px and a MCU STM32H750. For evaluation it works fine. Now I was told that real I(prod...
I am currently working on a project using TouchGFX, Ethernet an LwIP on a STM32H745I board and I was wondering if anyone has encountered a similar issue.I am using :the firmware package v1.9 for the H7 (I also tried with the v1.10),TouchGFX 4.18 (I a...
Hi, I am trying to run a touchgfx designer generated project in cubeIDE but when I go to the IDE and enable I2C1 in the .ioc file... I get the following error while building: C:/TouchGFXProjects/blabla/TouchGFX/target/generated/TouchGFXGeneratedHAL.c...
Hi everyone. I hope you are well.I am researching how to write LD file. I listened external flash pins. I used an "External Flash Loader file" to program the external Flash IC and MCU. I used STLDR file that work. I will write stages step by step; 0x...