Hey Everyone'Am using Stm32f103c8 with Arduino IDE to read temperature from thermistor and Voltage from the lithium battery cell, connected to LCD. I noticed the values received on the LCD is not both from the thermistor and the battery, because when...
Posted on February 03, 2017 at 14:40I have Nucleo-F767ZI board and want to use Arduino protoshield to ease making connections to a peripheral (I will solder 2x8 pin header to the shield and use a ribbon cable). However I cannot find any PDF on ST Zi...
I'm trying to connect stm32f103c8t6 board with ILI9325 LCD display. I have created a driver for it in Atollic TrueStudio and run it successfully. Now, I am trying to transfer the driver to the Arduino IDE, because here it will be easier to integrate ...
I am trying to use arduino IDE to program the STM32F1 discovery with waveshare 4inch LCD using the demo code provided https://www.waveshare.com/wiki/4inch_TFT_Touch_Shieldam I using the correct package?https://github.com/stm32duino/BoardManagerFiles/...