STM32 MCUs TouchGFX and GUI

How to use X-NUCLEO-GFX02Z1 display expansion board with Nucleo-F746ZG board (STM32F746ZGT MCU)?

Hi. So I use the Nucleo-F746ZG board (STM32F746ZGT MCU) and got the display expansion board X-NUCLEO-GFX02Z1. As environment I normally use Keil uvision 5. STM offers a library only for XCube, so tried that out instead of using Keil but it gives me a...

https://github.com/lvgl/lv_port_stm32h745i_disco => to stm32h750b disco

I am trying to get the https://github.com/lvgl/lv_port_stm32h745i_disco to run on the STM32H750 instead of the H745 disco.I have selected the external loader and at startup the corresponding project loader. In the main.c file of the disco port projec...

Blank screen while using stm32 with OLED 128x32 SSD1306

Hello all,I'm trying to use STM32 bluepill with OLED SSD1306 128x32 to display characters.I've tried many many libraries but no luck. The screen remains blank. No response. But the same screen works with arduino. So i know connections are fine, only ...

Devops for TouchGFX

I have started a new TouchGFX based project and want to apply devops. For now my primary goal is to automate the build and to get the build binaries. At my previous job I used a Jenkins pipeline to automate a TouchGFX build. We maintained our own ...

Trying to connect a camera via DCMI and then send the images via UVC protocol out the ST-link/v2USB connector of a nucleo board to a PC - so the board looks like a webcam. Is this possible and are there any examples of this out there to start from.