Hello,I am new to the STM environment and need to test if one M7 core is sufficient for my project. I need to use Ethernet (simple GET, POST, and PATCH requests), an LCD touch panel, and a peripheral that requires EXTI interrupts approximately every ...
Hi everyone,During developing applications with STM32l476, using HSI16, I choose STOP1 or STOP2 mode to reduce power consumption , and wake up with RTC Alarm.if (HAL_RTC_SetAlarm_IT(&hrtc, &sAlarm, RTC_FORMAT_BCD) != HAL_OK) { Error_Handler(); } ...
Hi,For FreeRTOS we can choose using CMSIS OS wrapper in the CubeIDE. But there is not such options for ThreadX. So, how to enable it? Thanks.
Hello STM Community,I am working with the STM32G431 microcontroller and have encountered a discrepancy between the practical and theoretical ADC sampling rates. Here's my setup:ADC Input: PA0 configured as ADC1_IN1 (single-ended mode).ADC Parameter...
Hi Community,I came a cross with a strange error that I can not understand the reason.As I search the read me file of the example project which is shared by ST.It is written as below.2. load the image into the target3. Execute the code- LED4 toggles ...
I am currently working on initializing the Ethernet peripheral on the Nucleo-H723ZG using the following environment:CubeIDE Version: 1.17.0 (MacOS)STM32Cube Firmware Version: H7 V1.12.1While calling the MX_ETH_Init() function, I encountered an issue ...
A BOT protocol read fail error is occurring in usbh_msc.bot.c:- See "*** MY MOD-" below USBH_StatusTypeDef USBH_MSC_BOT_Process (USBH_HandleTypeDef *phost, uint8_t lun) { ... else if (URB_Status == USBH_URB_STALL) { /* This is Data IN Stage STALL...
Hello everyone,I’m encountering an issue with the srand() function in my STM32H747 project, and I would appreciate your insights on what might be causing this problem.Hardware:MCU: STM32H747IIT6Custom boardSoftware setup:CubeMX-generated projectCube ...
Hi,Context : STM32F777, FreeRTOS, Cmsis V2, LWIP, Sockets, TCP, UDPOnly one task is used to open, listen, poll, accept, send, receive, and close sockets. Since STM32CubeIDE 1.7.0 and the new version of ethernetif.c, modifying "low_level_output", we h...
I am using the STM32H743VITX MCU and TouchGFX with the display (800x480px) in a single buffer format with RGB565. The framebuffer size is calculated to be 750KB; however, the MCU does not have a contiguous 750KB region in RAM. I am exploring ways to ...
