Hello Community we are using MT29F256G08AUCAB NAND Flash Memory in Our Custom Board and that we Connected with FMC Signal.Also am using HAL NAND Library to Program NAND Flash but there are Several doubts what HCLK Represent and What Value we have to ...
File stm32f4xx_hal_nand.c has changed in version 1.27.0 of the STM32CubeF4 package, but nothing is mentioned in the release notes. Also, in version 1.26.2, there was a 2017 copyright in the file, while in 1.27.0, there is a 2016 copyright. Is there a...
Hi, I am currently working on an project which uses CMSIS RTOS V2(freertos version)There are total 5 tasks running inside the system and one of the task uses internal flash function only once if there are changes to parameter functions inside the sys...
Hi. I hope this is the right place for such a question about USB communication, I am still new to STM32.I have been trying to send a message from my STM32 board (STM32756-EVAL) without using UART, but the OTG USB. I have been trying to set up my PuTT...
Hi all,we're planing to use an STM32H742 with external SDRAM (for data) and external Quad SPI flash.The Quad SPI flash shall hold the application binary - i.e. instructions, constants, etc. to be loaded at boot and all code to be executed.We'd like t...
Hi,I am working STM3240G-Eval Board. Integrated LWIP and able to ping without any issues. Followed the FSMC_SRAM_DataMemory example to change the data memory sram and I am able to allocate variable in SRAM. Now the issue is not able to ping. Please h...
Hi everyone,I have a project using STM32H723ZG interface with SDRAM IS42S16400J (via FMC) and LAN8742. If I enable both FMC and LWIP to run with FreeRTOS, my program ends up jump to hard fault handler. If either FMC or LWIP is enabled with FreeRTOS, ...
Note: SD card is not an option for us to have onboard.I want to mount FAT file system on external flash memory interface through FMC NAND controller. The file system should be accessible through FTP from host software. Partition NAND memory and mount...
Hi everyone,I met a problem now. I am developing display product using stm32f429zet6, the lib is f41.26.1. In my project, nand flash is used to storage images and fonts, the sdram is used to cache images. Fatfs work upon nand. Obviously nand and sd...