Posted on February 21, 2017 at 06:32 I need to interface AT070TN92 7' LCD display (Driver element: a-Si TFT active matrix, Resolution: 800 × 3(RGB) × 480) with STM32F103VCT6 controller. The display have a back-light driver board. Is it possible to ...
Posted on February 16, 2017 at 14:09I am in need of interface AT070TN92 V.X with stm32f103vct6. I found that SSD1963 is good to interface AT070TN92 V.X with stm32 controller. But i need to know that is it compactable with stm32f103vct6.
Posted on November 04, 2016 at 13:14Hi. I'm working with a STM32F769I-DISCO board. I've generated a project created with ST32Cube. I've selected LTDC -> ''RG888 (24 bits) DSI'' and I've enabled DMA2D. I'm comparing with the LCD_DSI example. I've se...
Posted on July 01, 2016 at 17:03Hello guys,I am using Keil Uvision 5.2 and cube Mx for developing STM32 MCUs.and I want to Drive a TFT-LCD which the size is 2.8 inch and it has 320*240 pixels and it has ILI9328 driver inside.I have few information a...
Posted on April 26, 2016 at 21:56I am trying to create an STemWin application for STM32F429 discovery. I have an old application, handmade from some old CubeMX. It is working fine. Now I created a new basic project with CubeMX 4.14, I only select...
Posted on April 03, 2014 at 14:41Hi. Help is needed for Alpha channel input (CM_A4 an CM_A8) in combination with the HAL_DMA2D_BlendingStart(...) of the CubeMX HAL. It seems like FGCOLR is not set neither with the call nor with Dma2dHandle.LayerCfg....
Posted on April 03, 2014 at 16:23Dear all,I'm a satisfied user of the new STM32CubeMX software. I'm currently using the last version: v.4.1.0 with the latest libraries/firmware package (v.1.1.0).In every guide I read I found out that in the middlewa...
