Posted on May 30, 2012 at 19:44Hi, I am trying to build my own application to program, the flash memory and option bytes on my ST32. I have been trying to use DfuSe Application Programming Guide (UM0392) but there is no mention of how to edit the op...
Posted on April 10, 2012 at 15:29Hi, I am working with an STM32F4, and I am trying to use the USB OTG capability to boot load the flash drive. I have successfully loaded the flash trough UART3 using Flash Loader Demonstrator. In order to start the b...
Posted on May 25, 2012 at 15:55 Hi guys ! Firstly - hello to everyone ! I have some questions. I am trying to make a project on STM32F407VG that would transfer data from microphone to the headphones through a filter. I am totally new to t...
Posted on May 28, 2012 at 04:44Hi, I have just received a new Mini-STM32 board from here:http://au.suntekstore.com/goods-14002458-32inch+TFT+LCD+Module++Mini+STM32+Development+Board++USB+Cable.htmlI put together some sample code to, basically, flash...
Posted on May 28, 2012 at 09:00 We have a problem with the STM32F105 USB endpoint interrupts. The code is basically the VCP sample (V3.3.0) but with the UART removed and instead the USB code reads/writes fifos connected to the rest of the STM code. ...
Posted on May 23, 2012 at 09:51Hello.Please give me some knowledge about the topic.Now I use STM32F103, and I found 2 strange packets transferafter initializing endpoint as double-buffered bulk tx.I found this problem after trying the following step...
Posted on May 22, 2012 at 18:41Hi, I am using DfuSe Demo(v3.0.0), and I want to know what values I should place on the flash memory write protection option byte, and read protection option byte, in order to enable-disable this properties. Thanks in ...
Posted on May 14, 2012 at 13:34I want to boot my stm32 discovery board (STM32L152RBT6) using usart. I have tried going into system memory boot mode by putting BOOT0=HIGH and BOOT1=LOW. Then i tried to send my .BIN file using hyperterminal (Nothing h...
Posted on May 07, 2012 at 10:38Hi all ; I have a new project with short deadtime to finish; I have been using STM32 for 2 years and so PIC32 for on year ; but I noticed that microchip is giving a complete working library ; for example file sys...
Posted on December 23, 2009 at 09:57USB / Run-Time DFU Interface Descriptor #usb-run-time-dfu-interface-descr
