Ask questions and find answers on STM32Cube packages, including HAL, LL and middleware, and expansion software.
Hi All!I'm trying to use USB high speed in STM32h723 with an external phy usb3300.I started the program from the CubeMx Ux_Device_CDC_ACM which uses the internal phy.I modified the clocks and the USB module to use an external phy USB3300 and so far i...
Hello Techies, We are using STM32H743, we would like to run mcuboot on stm32h743, but we haven't find the example for stm32h7xx devices, Is there any specific reason not to provide mcuboot example for h7 devices?
I am trying to read multiple channels of ADC (like Temperature sensor channel, Vbat channel, Vrefint ...) using the interrupt method, but I am not able to read all the Channel readings , only the readings of first channel is being reflected for all t...
Hello everyone,I have setup my stm32 to use interrupts and have enabled them to work on spi1 and all 4 i2c ports. The relevance of the i2c ports is that they run continuously and may call the interrupt service routine while the spi one is being calle...
Hi guysI am using TrueStudio and trying the Nucleo 64 STM32F446RE.when I try to debug, the console always shows Starting server with the following options: Persistent Mode : Disabled Logging Level : 1 Listen Port Number : 6123...
Hello ST Community,I’m working on a project where I initially developed software on the STM32H735 evaluation board. Now, I need to port this project to a custom board using the STM32H730 microcontroller. The external flash memory is the same as the o...
The ADC buffer is not being written to I would like it to zero all values less than 5 to eliminate noise. My project is a DTMF detector. I need it to pass through audio when no DTMF tone is detected and execute a command when there is one found. Also...
Good afternoon, We use ThreadX in conjunction with TouchGFX.As debugger we use ST-Link/V2 and GDB as debugger.If a simple new project is started with several threads and TouchGFX, all threads (active and inactive) are displayed in the debug view.All ...
Hello, trying to port Miro Samek's example: https://github.com/QuantumLeaps/FreeACT - into my nucleo-F429ZI board.As a reference there is project running on nucleo-h743zi what i did:changed all configs to be STM32F429zi valid, changed ld file, makefi...
Using python I have written small app to convert SVD V1.4 into assembly include. Then I started to write assemby code using RM0492 Rev2 .For the peripherals I use (RCC,ADC,GPIO,GPDMA,TIM,USART) I have found that there are few errors in the SVD file, ...
