Posted on October 31, 2012 at 15:49Hi all, I used STM32F4Discovery successfully using SWD and IAR to develop my application. Today I got my boards, they have STM32F405RG on them (the Discovery has the 407). I tried to connect to the board using Segg...
Posted on November 01, 2012 at 06:41hi I'm using ST-LINK utility version 2.4.0 with STLinkUSBDriverdll V4.2.3.0 and ST-Link_CLI V1.4.0. I'm using Win 7 x64. I'm using a ST-Link V2 If I use it in ''automatic mode'' it seems to leak memory at an amazi...
Posted on June 10, 2012 at 19:46Hello! Hope you can help me to fix my problem.St-Link didnt see STM32F4 Discovery, but I've tried[DEAD LINK /public/STe2ecommunities/mcu/Lists/STM32Discovery/DispForm.aspx?ID=1944&RootFolder=/public/STe2ecommunities/m...
Posted on October 03, 2012 at 11:42I believe the original board only supported V1 which use the MSD SCSI transport layer for communications, where as the V2 uses direct USB end points.So is it possible to flash a STM32vldiscovery board to support ST...
Posted on November 28, 2010 at 14:27Where is the ST-Link protocol specification #jtag #st-link #stm-32 #stm32-jtag #stm32 #st-link #stm32 #stm-32
Posted on August 28, 2012 at 09:03 I am trying to get OpenOCD to work with my STM32F4Discovery board and I get the following error: fabio@fs-1:~/workspace/stm32_code/test$ openocd -d 3 -f ./openocd.cfg Open On-Chip Debugger 0.6.0-rc1-...
Posted on May 03, 2012 at 13:22 Hi all, i want to configure OpenOCD for Stlink(embedded on stm32vld board)... but after building and starting openocd i've got this output: openocd -f /usr/local/share/openocd/scripts/in...
Posted on October 02, 2011 at 14:29Hi everyone,I recently bought a STM32 discovery board and it seems that the ST-link is not functioning properly when I run ST-link utility it says no ST link detected, I made sure that it is in SWD mode and I have ...
Posted on October 04, 2010 at 22:53 Is there any chance for us Linux users to get a linux kernel module to enable us to use ST-Link in Linux? A ST-Link Utility linux version would also be very practic! #stlink #linux #openocd #st-link
Posted on November 18, 2010 at 21:40Hello I've sadly got to know that native ST-Link built in my STM32Discovery won't work with OpenOCD. So my question is: what hardware would you suggest to connect Discovery with to use OpenOCD? Some Jtag? First qu...