Ask questions and find answers on STM32Cube packages, including HAL, LL and middleware, and expansion software.
Hello ST community,I have a question regarding the HID functionality of an STM32 controller.I have realised a (driverless!) joystick with an STM32 controller. So far everything works fine.However, I would like to write additional PC software that can...
There are some errors in SVD when it comes to reset values. I'm basing my judgement as I am comparing SVD with RM0492: RCC_AHB1ENR SVD: 0xd0000100 RM:0x90000100 (BKPRAMEN set in SVD)RCC_AHB2ENR SVD:0xc0000000 RM:0x40000000 (resered bits b31 set in ...
ADC_CFGR register and EXTSEL field.In SVD this single field is split among four 1-bit long ones (according to RM0492) and enumerated values desciptions are messed up (adc_ext_trg0 & adc_ext_trg1 repeated for all 4 "subfields")RM0492 discusses this as...
(1) TIM1_SMCR and TIM2/3_SMCR have different naming convetions for SMS / TS fieldsi.e. for TIM1_SMCR there are SMS/SMS_1 and TS/TS_1 and for TIM2/3_SMCR, SMS1/SMS2 and TS1/TS2 respectively.(2) Also TIM1_SMCR_TS_1 field has no enumerated values, while...
HelloWe are using the Nucleo-f439zi (STM32F439ZITbu microcontroller) https://www.st.com/resource/en/reference_manual/dm00031020-stm32f405-415-stm32f407-417-stm32f427-437-and-stm32f429-439-advanced-arm-based-32-bit-mcus-stmicroelectronics.pdfWe have s...
I am trying to prototype ethernet on the NUCLEO-H7S3L8 eval board. When enabling ethernet through CubeMx using the same configuration I've used on the NUCLEO-H563ZI, the ethernet driver fails initialization. Is there an alternative Ethernet driver th...
Good morning everyone,I'm here to ask for advice regarding the approach I want to take for enabling firmware updates by non-expert users.I have built hardware that uses the STM32F103, and over time I will certainly release updates. Currently, I'm usi...
Hi,The requirement is to port MQTT of NetX Duo to STM32f412 ,without the need to use the TCP/IP and TLS addons in NetX Duo. Since we have DIGI XBee's modem and we will use its TLS socket for communications. I have the secure-socket-like interface r...
HELLO,I am working with the LwIP MQTT client(stm32f407) and trying to connect securely to Azure IoT Hub using port 8883. I have enabled secure TLS connections by defining LWIP_ALTCP and LWIP_ALTCP_TLS. However, I am facing a connection reset issuemqt...
I made a project on keil with generate flm file to download to external flash with my board. My board has a stm32h7b0zbt6 chip with ospi interface with a spi nor flash W25Q128. the interface releate is: PF6 ------> OCTOSPIM_P1_IO3 PF7 ------> OCTOS...
