Posted on October 09, 2013 at 12:02Hello, I'm currently working on a new board designed around a STM32F407VE without any major problem. I'm using the STM32F407 as an USB VCP device to communicate with a control application running or with a terminal...
Posted on October 08, 2013 at 02:35Hello everyone. I am a newbie and learning STM32 step by step. I purchased this Discovery board and set up Keil environment. I tried USB HID demo and now I want to try to get my board get recognized as USB Mass Sto...
Posted on October 07, 2013 at 14:35Good dayI am an Engineering student currently busy with a final project. What the project breaks down to is that I have an application on Windows that sends a UDP packet to a STM3240G-EVAL & STM3240G-ETH. The kits ...
Posted on October 04, 2013 at 13:14Hi all ! I did a device using the STM32f103, managed by a GUI from windows PC. I did my protocol and so on. STM32, after any command, answers with an ACK. Then the PC sends the following command and so on. Now, d...
Posted on September 27, 2013 at 16:37Hello every body I wanna to make a device that has following features: Acquiring 3648 analog data from a TCD1304 linear sensor at least in 200K sample per second speeddata should be taken 3 to 100 times in a s...
Posted on May 27, 2013 at 10:58Hi ST,is it possible to generate SSPLIT or CSPLIT token on USB FS device? And if so, what is the endpoint channel configuration for such token.Using STM32F207IGT6.Split packet described here: http://www.usbmadesimple.c...
Posted on March 09, 2013 at 22:15Hello, I am trying to implementing PID in Systick Interrupt handler.I get this error after compilation in Keil MDK '' C:\Keil\ARM\CMSIS\Include\arm_math.h(268): error: &sharp5: cannot open source input file ''ARMCM...
Posted on March 20, 2013 at 23:16Hi all! I re-initialize my USB device during my application is running (I need to init another class). But PC doesn't recognize that the USB has been initializated again. USB bus has to be unplug and plug again and t...
Posted on September 23, 2013 at 15:48I'm trying to use LwIP stack. I've set the PHY to advertise for 10M half duplex and autonegociation on. All registers of interest MAC, PHY and DMA are recorded into flash for monitoring purposes. After ethernet c...
Posted on April 25, 2013 at 15:18Hello all. I have been searching for a while and hate to bother others, but I have come to a point where I need to request help. I really hope this has not yet been answered elsewhere, but if it has, please direct me...
