Ask questions and find answers on STM32Cube packages, including HAL, LL and middleware, and expansion software.
We are having a bear of a time getting the USB2514 to work properly with the STM327H73 both with the USB2514 built into our board and also with the STM327H73 connected to a EVB-USB2514BCQFM36 eval board. Looking for suggestions for resolving this iss...
Originally a comment on the How to redirect the printf function to a UART for debug messages Knowledge Base article.Moved to main forum for better visibility & discussion Hello @ST AME Support NF ,I have tried example code...\Repository\STM32Cube_FW_...
Hello,This is assuming STM32G0 with SPI configured as slave. I'm looking for a way to detect if a ongoing SPI transfer is happening. Not at the byte level but at the bit level.So I can detect if some incomplete byte is pending in the RX buffer (due t...
Hello ST Community, I am trying to set up SPI communication between two STM32 microcontrollers (two NUCLEO-F401RE boards); one as an SPI master and the other as an SPI slave. For now, I am only trying to transmit only one byte (0x61). For this I am u...
Hello ST community, I am using STM32U585AIIQ6 micro controller I wanted a .c files to be as a static library i am using tx_thread_sleep one function of my .c files if those files are are included as a source file in my project the tx_thread...
Hi all, I was able to make the qdec on timer1 run and read pulses from an external encoder. Now I wanna generate an interrupt after let's say 100 pulses. That interrupt should toggle a led I mean the timer has interrupts, but i don't know how to use ...
I do not know if this is appropriate place to ask but I will try. We are integrating the STM STL library and we cannot get the flash test to be successful.This, this, this nor this helped. I believe we are generating the checksums correctly, we tried...
Hello, I know that STM doesn't manage AZ-RTOS, so this is more of an informational post to help others. In one of my projects, I'm using an STM32H7R3L8H7H MPU, on which I found this behavior very cumbersome. Some settings for my board are stored in a...
Hi,I am considering using the STM32N6 series for my next development.Are there plans to make "X-CUBE-STL" supports STM32N6 series in the near future?
i have the nucleo-h753 evolution board , and i want to activate the ethernet port to perform udp client .i want the implementation without FREERTOS i followed the steps described in the link below :https://community.st.com/s/article/How-to-create-pr...
