Ask questions and find answers on STM32Cube packages, including HAL, LL and middleware, and expansion software.
Hello,I am Manikandaprabhu, we are working with the STM32H745XIH6 MCU Disco Board and interfacing it with an eMMC module.The eMMC communication is working correctly on its own.However, we are trying to integrate it with the FatFs filesystem for acces...
Hi,I'm currently working with the STM32N6570-DK and the VENC_RTSP_Server Application from the STM32CubeN6 package.I'm trying to evaluate the VENC peripheral h264 performance.By default, the example application runs at 20 fps, I would like to take it ...
Hello ST Community,We are using the STM32G0B1RET6 and have created a custom bootloader using FDCAN. Our setup includes two separate STM32CubeIDE projects:Bootloader ProjectProgrammed via ST-LINK V2Receives application firmware over FDCANWrites it to ...
I need to know how to calculate Timing Register 0 for I3C. In this example, the I3C clock is 150 MHz. Can someone explain the value of the register and how it is calculated?
Hello everyone! I am trying to use the ADC of my NUCLEO-F334R8 board. I want to read the PC1 pin (ADC12, channel 7). I try to initialize the ADC with the following code: void BSP_ADC_Init() { // Enable GPIOC clock RCC->AHBENR |= RCC_AHBENR_G...
Respected , Hi we stm585 discovery boared and we are clone https://github.com/FreeRTOS/iot-reference-stm32u5/blob/main/ In which for tfm code link : https://github.com/FreeRTOS/iot-reference-stm32u5/tree/main/Projects/b_u585i_iot02a_tfm We facing co...
I try understand how migrate X-CUBE-IRREMOTE receiver code to LPTIM. Is this doable in IN1 LPTIM3 pin ?If not directly can LPTIM IN trigger next TIMx events?
I believe there's a bug in the stm32h7rsxx_hal_dma code for dealing with repeated blocks in interrupt mode. This bug probably exists in other STM32H7 devices as well.With a typical repeating transfer, in *NON* interrupt mode, the DMA transfer complet...
Hello,I am currently working on a project with an HTTP server, successfully implemented using FreeRTOS. In this setup, I handle client requests for opening and collecting data from the client side. However, since I need to display real-time data on a...
I'm working on my cpp scaffold for stm32, so I read the startup file generated by STM32CubeMX.And I noticed that the startup file contains a definition called BootRAM, but there is no documentation on it.It also seems not being used anywhere else on ...
