Ask questions and find answers on STM32Cube packages, including HAL, LL and middleware, and expansion software.
Hello. I'm upgrading from version 1.0.0 to 2.0.0 of the X-CUBE STL for STMF4, but I'm struggling to resolve this warning:Warning: L6775W: stl_sch_main.o(.debug_frame) has FDEs which use CIEs which are not in this section. The warning disappears when ...
HAL_I2C_Slave_Seq_Transmit_* and HAL_I2C_Slave_Seq_Receive_* functionsI have to program an I2C slave which during communication the transfer direction switch. The HAL driver manual does not go into too much details. Are there example code anywhere? T...
Hello, I am working on a Bootloader that reads USB-Key using USB_Host middleware to retrieve files before performing some operations but I have some issues detecting some USB keys.USB 2.0 Keys are all detectedUSB 3.2 Keys are not well detectedI have ...
Hi guys I've upgraded from 1.5.1 to 1.5.2 and I'm receiving HardFaults when using FDCAN \STM32Cube\Repository\STM32Cube_FW_G4_V1.5.1\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_fdcan.c FW 1.5.1 Line: 3493 /* Write Tx payload to the message RAM...
Hello,I am Manikandaprabhu, we are working with the STM32H745XIH6 MCU Disco Board and interfacing it with an eMMC module.The eMMC communication is working correctly on its own.However, we are trying to integrate it with the FatFs filesystem for acces...
Hi,I'm currently working with the STM32N6570-DK and the VENC_RTSP_Server Application from the STM32CubeN6 package.I'm trying to evaluate the VENC peripheral h264 performance.By default, the example application runs at 20 fps, I would like to take it ...
Hello ST Community,We are using the STM32G0B1RET6 and have created a custom bootloader using FDCAN. Our setup includes two separate STM32CubeIDE projects:Bootloader ProjectProgrammed via ST-LINK V2Receives application firmware over FDCANWrites it to ...
I need to know how to calculate Timing Register 0 for I3C. In this example, the I3C clock is 150 MHz. Can someone explain the value of the register and how it is calculated?
Hello everyone! I am trying to use the ADC of my NUCLEO-F334R8 board. I want to read the PC1 pin (ADC12, channel 7). I try to initialize the ADC with the following code: void BSP_ADC_Init() { // Enable GPIOC clock RCC->AHBENR |= RCC_AHBENR_G...
Respected , Hi we stm585 discovery boared and we are clone https://github.com/FreeRTOS/iot-reference-stm32u5/blob/main/ In which for tfm code link : https://github.com/FreeRTOS/iot-reference-stm32u5/tree/main/Projects/b_u585i_iot02a_tfm We facing co...
