Hi, I am using ADC1 on stm32H563ZI nucleo board with trustzone enabled, I am not getting proper adc values (getting adc count of 822). When trust zone is disabled I am getting proper value of around 4095 with input of 3.3Volt .I am attaching the proj...
Hello all,I'm working on SBSFU for the STM32F4 controller. A shell script has to be provided in the pre-build option of STMCUBEIDE. But while building the project I get the following error. c:/st/stm32cubeide_1.4.0/stm32cubeide/plugins/com.st.stm32cu...
Hello SBSFU users !The latest release of STM32CubeIDE 1.9.0 is introducing GNU Tools version 10.3 as toolchain. This new toolchain creates an issue in the SBSFU final build.A new release of X-CUBE-SBSFU is coming in around one month to fix this but, ...
Almost all sample projects have support of STMCubeIDE in the development board B-U585I-IOT02A except following bootloader projects.SBSFU_AppliSBSFU_BootSBSFU_LoaderOn release note it is mentioned that, will be added support in the next release but da...
Hello,The new SBSFU 2.6.1 is available now.The main change concerns the compatibility with latest STM32CubeIDE based on GNU Tools 10.3 which are version 1.9.0 and 1.10.1There is no need anymore to follow the steps provided previously to have a succes...
The key which signs and encrypts the userApp is compiled along with the SBSFU and generates as a complete binary with keys by using STM32CubeIDE.Is there any way to change this key after the build process of SBSFU?
Hello Support Team.Good Day.We have chosen the STM32U585ZIT6Q (-40C to 85C, LQFP -144 pins, with trust zone core) controller for our product.According to the firmware architecture, we intend to create two separate partitions, one for safety-critical ...
In previous development project we were able to place several variables with a magic number and checksum of the application at the end of the interrupt vector table that the bootloader could use to check if a valid application existed.Since the STM32...
Hi,I ran the SBSFU example of STM32CubeU5 following what is in the readme file without any problem. Then I disabled TrustZone but I cannot run the projects made with STM32CubeIDE, verification of the downloaded firmware fails. If I try to erase the f...
Hi All,i have downloaded the STM32U585 firmware package from the official sources and want to implement the TFM SBSFU program code into my development board(U585-IOT2A) using STM32 Cube IDE. The user manual mentions installation not possible using Cu...