Ask questions and find answers on STM32Cube packages, including HAL, LL and middleware, and expansion software.
Dear STM32 Community, We believe that the example projects provided for the STM32Cube embedded software are a valuable resource when developing projects. We would like to better understand how developers use these examples in their workflow and e...
Hello all,I've recently started a new project with the Nucleo144-F429ZI, where I want to be able to send UDP packets over Ethernet (broadcast). I've found a limited example of a HTTP server with the LWIP stack, but I'm totally unfamiliar with it and ...
I have a code that uses a timer to generate an interrupt every 100ms which enables the acquisition of one sample from the ADC. After the sample is obtained, it is transferred to a PC by USB. The problem is that the board gets stuck after a fixed amou...
I though of using the NUCLEO-H743ZI(which might be an overkill) is there a demo for that ? (that I can easily open an ssl socket and send/get requests ?).1) is embed os good for this , or stm32CubeMX better ?2) Tried using the stm32f407 with freeRTOS...
Hi,regarding to AN2606 (PDF page 84 = STM32F303x4(6/8)/334xx/328xx devices bootloader), it seems that the STM32F303K8 doesn't support "CAN1 bootloader", although there's a CAN bus available. Is this a documentation failure or is this a fact?
Hi, I'm using stm33F7 reading sensor via SPI communication, it's working in slave only receive mode, I can read data in interrupt mode perfectly without os, but as I enable FreeRTOS (using STM32CUBE) after a random time interrupt stops firing. I'm al...
Hi, can somebody help with USB CDC on stm32f407G-DISC. I have configure in CUBE MX to use usb CDC in FS and when i connect to PC ( WINDOWS 10) i see setting up device (STM32_Comport) and then pc says that USB serial device is ready to use. Why windo...
Hi everyoneI want use STM32F746-DISCO audio unit.I want make a application whit touchGFX which also has audio output.What are the solutions for audio output?
My CPU is STM32H750VBTxMy Configuration of the timer is void MX_TIM2_Init(void) { TIM_SlaveConfigTypeDef sSlaveConfig = {0}; TIM_MasterConfigTypeDef sMasterConfig = {0}; TIM_OC_InitTypeDef sConfigOC = {0}; htim2.Instance = TIM2; htim2.Ini...
I'm sending ADC results via queue (data in a struct). The data values being sent shown in picture 1, and they are as expected. When receiving some of the data missing and in wrong place. Rows 1&2 are missing and rows 13&14 are all zero. What is this?...
