Ask questions and find answers on STM32Cube packages, including HAL, LL and middleware, and expansion software.
I'd be glad to help you create a post about the Ethernet and LwIP implementation issues you're facing after following the article you linked. Here's a comprehensive response incorporating insights from potential causes and solutions, while adhering ...
While in debug I get and error in this line of code. I do not get an error when running code not in debug./* Wait till HSE is ready */while (READ_BIT(RCC->CR, RCC_CR_HSERDY) == 0U){if ((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE){return HAL_TIMEO...
https://github.com/STMicroelectronics/stm32h7rsxx-hal-driver/blob/ecc746788b9843dd4295f0acb58b3d15c3477abb/Src/stm32h7rsxx_ll_usb.cIn stm32h7rsxx_ll_usb.c in function USB_CoreInit:if (USBx == USB_OTG_HS){if (cfg.phy_itface == USB_OTG_HS_EMBEDDED_PHY)...
I apologize for I am new at learning bootloader and I am trying to create a custom bootloader for stm32f103 custom dev board. First, I just want to know how can create a compatible binary file to be flashed at existing bootloader.https://github.com/s...
I'm kind of stuck. I have USB_CDC running, data appears on the Kitty-Terminal in Windows10 via USB, presented as COM6: serial device in Windows. Sending data vis USB_CDC is easy: ret = CDC_Transmit_FS( buffer0, sizeof( buffer0 ) ); if( ret != USB...
hi i have a question about stack memory.is memset or sprintf function take space on ram stack memory? For example i create global array like my_array[1024]. when i call memset in my private function, does memset function take extra space on ram(stac...
Hi, I have a development board with an STM32H745XIH6 microcontroller, which has dual cores. I am trying to debug using the SWDIO and SWCLK pins. Debugging works fine on the M7 core, but it does not work properly on the M4 core. This is what the issue...
Hi,I have developed an application using the STM32F103C8T6 MCU to function as a USB keyboard. The application uses the USB communication protocol to send keystrokes. One of the requirements is an emergency button that, when pressed, disables all othe...
I am a beginner. Please help me figure out why the interrupt is not happening. I want to measure the duty cycle, but the interrupt is not enabled. I am losing hope that this is possible.#include <stdint.h> #include <stm32f0xx.h> #include <stdbool.h> ...
Hello everyone,I'm using Netconn snmp over freertos on my project and I found an issue when using 2 netif interfaces. The problem is that when I receive udp messages, the response is always routed to the default netif despite having the LWIP_HOOK_IP4...
