Ask questions and find answers on STM32Cube packages, including HAL, LL and middleware, and expansion software.
Posted on April 04, 2017 at 19:41Hi all, I am using CubeMx generated code for USB Host- CDC communication. With this code Enumeration fails under two scenarios1) Host attached to a CDC device(CDC device not powered externally) then Power on Host.2) ...
Posted on August 26, 2016 at 16:48 There is a bug in HAL in full duplex I2S. The internal callback in the library disables all further DMA requests even if circular buffering is enabled. This is incorrect as it requires that an application call ...
Posted on April 04, 2017 at 04:05I need to be able to de-activate the USB CDC port and yet still be able to negotiate for power to charge a battery. The use case here is that I have a device with both Bluetooth SPP and USB CDC and I want to allow o...
Posted on March 31, 2017 at 13:47Everyone,I have a question about configTICK_RATE_HZ ((TickType_t)1000) related with my Task,How can I make it slower if my task is a lot slower than 1000Hz, for example it needs 5s or more to finish ?Thanks#freertos ...
Posted on April 02, 2017 at 09:52Everyone,Can I start task inside task on RTOS? so after task 1 is finished, go to task 2, finish task 2 return to task one,Here's what I have written, any advices ?thanks/* StartDefaultTask function */static void Sta...
Posted on April 01, 2017 at 09:25Hello, how do you write to an USB PHY configuration register via ULPI ? I would like to swap DP and DM pins from Microchip USB3343 by setting bit 1 of register 0x39. http://ww1.microchip.com/downloads/en/DeviceDoc/33...
Posted on March 12, 2014 at 16:05Setup: I've just generated code for stm32f407 using the latest STM32CubeMX. Here's the generated code for delay function in file stm32f4xx_hal.c:void HAL_Delay(__IO uint32_t Delay) { uint32_t timingdelay; tim...
Posted on November 09, 2016 at 10:34 I am new to the hal libraries (but not stm32 devices) and struggle to see howHAL_UART_Transmit_IT is expected to be used for something simple like printf over uart. Take a blocking example: void...
Posted on May 03, 2014 at 13:19Hello, I think I have a problem similar to the one described in the post ''STM32CubeMX as Eclipse plugin on Linux 64 machine''. As I'm really reluctant to use eclipse, I would like to know if a plugin for Qtcreator is ...
Posted on March 24, 2017 at 14:38Everyone,I tried to run SDIO with RTOS, but never got luck,Any ideas why ?If I disabled RTOS, SDIO can run properly but if I enabled it, SDIO is stopped running..Thanks#freertos #sdio
