Ask questions and find answers on STM32Cube packages, including HAL, LL and middleware, and expansion software.
I'm working with an STM32H753 MCU and trying to receive messages from a PC via UART to implement a simple state machine. The idea is that the MCU should switch to different states based on the received message.Initially, I attempted to use fgets(mess...
Hi everyone,How can I use the LwIP stack to enable Ethernet on the STM32N6 board? I found a tutorial, but it was for the H5 series. Additionally, I couldn't find the LwIP middleware component in the STM32CubeN6 folder.Thanks in advance!
STM32CubeG0 git repository points to temporary branch in submodules.Here the repository cbtl08gp053 is on tag v1.0.1 which is not part of main branch.
Hello,I'm new to this community and I'm trying to learn from different examples that are available online. I have STM32G474E-EVAL1 board and I want to include the sd card in one of my projects. So I founded the FatFs_uSD_Standalone Example that was ...
Hello,I am currently trying to complete a UCPD Sink implementation using the NUCLEO-G431RB with X-NUCLEO-SNKM1 shield. So far I managed to get to a state, where cable is recognised by CAD stack once pluged in, the power negotiation is (correctly?) in...
I am using STM32F103C8T6 and developed on STM32CubeIDE. This equipment has six similar I2C boards (same ICs, same function) connected to the master which are addressed accordingly. Each of these boards have 8 digital Inputs amounting to 8 bit valu...
Hi,I am trying to use the ROM bootloader on the STM32G071 to change the contents of specific flash sections. I was able to enter the bootloader just fine, at least I think so because I can see in the debugger how different points in the address spac...
Hii, I have a query regarding internal op amp , i.e. how we use internal op amp as a inverting amp. , what are the process to initialize the internal op amp in cubemx (HAL driver) and the output is shared to the adc pin.
Hello,I want to develop a firmware to synchronize an Ocxo on a 1PPS GPS reference signal. I have a Nucleo card with a stm32f429 to do the first tests. The configuration: 1 1PPS input (1 second), 1 10Mhz input reference of the OCXO, 1 DAC output, the ...
Hi,Currently working on a STM32U575, I was happy to see that the RTC now have a binary mode option.I've done some experimenting using the HAL (generated through CubeMX 1.15.1), and I'm intrigued about its init behavior, is it expected, buggy or lacki...
