HelloI'm using STM32429I-EVAL1 and its touchscreen is not working.When I plug st-link cable, originally touchscreen was initialized and displayed menu.But now, it only displays totally white screen and there is no reaction when I touch it.I did Softw...
Hi, tried downloading STM32CubeProgrammer software for all STM32 but as soon as I accept terms, the download doesn't start. I have tried as a guest with my email and with my account. I don't have any add blockers and have tried with my antivirus acti...
Hello,I have installed STM32CubeProgrammer (version 2.14.0) on a Linux machine. I have connected my NUCLEO-U575ZI-Q microcontroller to the machine, but the CubeProgrammer does not detect it (the machine does). I received this message on the CubeProgr...
I want to write firmware to stm32u575 using cube programmer, but when I do download from the erase & programming section, it fails to write.Of course, I have turned off the "skip flash erase before programming" checkbox.However, if I run the program ...
STM32_Programmer_CLI fails to list UARTs unless an STLinkV2 is also connected to a USB port (not even to any target). If an STLink is connected, the UARTs are then listed! Disconnect the STLinkV2 and the UARTs fail to list. So the issue appears to...
I executed this command : STM32_Programmer_CLI.exe -c port=SWD sn=xxxxxxxxx232xxxxxxxxxxxx and got the response that gave me details about the device, but not COM Port. Is there any command that gives me the COM Port number to which my device is conn...
good morning, i am using stm32h747i-disco board. for that when i am executing Touchgfx generated file into stm32cubeide. i am able to debug the m4 processor but not m7 processor. i am getting an error with " internal .elf file".then i did cm7 process...
I am using the cube programmer API in a Qt C++ windows application and hit a problem where there is clash in naming of the disconnect() function. disconnect() is in both qobject.h and CubeProgrammer_API.hI am not a C++ expert, so please tell me if I ...
Hi,I'm having problems entering in DFU mode on Windows using a sensortile.box pro. The board doesn't even show up on device manager howerver using the same board, with the same USB cable, on the same USB port on the same PC running Ubuntu the board e...
Hi,I have a STM32HSM-V2AE and I tried to follow de "SFI Step-by-step on STM32 boards". In the part of "HSM programming" I connect the STM32HSM-V2AE to the computer with the smart card reader ACS ACR39U-UF but I have the following error:Error: HSM ini...